For more information, please visit the product page | For information on related products, view External Power Supplies
date 11/01/2013 page 1 of 3
MODEL: PJ-010B │ DESCRIPTION: DC POWER JACK
FEATURES
• 2.5 mm center pin • 2.5 A rating • vertical orientation • panel mount
RoHS
SPECIFICATIONS
parameter
conditions/description
rated input voltage
rated input current
contact resistance1
between terminal and mating plug between terminal in a closed circuit
insulation resistance
at 500 Vdc
voltage withstand
at 50/60Hz for 1 minute
insertion/withdrawal force
terminal strength
any direction for 10 seconds
operating temperature
life
flammability rating
UL94V-0
RoHS
2011/65/EU
Note:
1. When measured at a current of less than 100 mA/1 kHz
SOLDERABILITY
parameter wave soldering
conditions/description dipped in solder pot for 5 ±0.5 seconds
min
100 0.3 -25
typ 16
5,000
max
2.5 50 30
500 3
500 85
units Vdc
A mΩ mΩ MΩ Vac kg
g °C cycles
min
typ
max
units
255 260 265
°C
cui.com
For more information, please visit the product page | For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-010B │ DESCRIPTION: DC POWER JACK
date 11/01/2013│ page 2 of 3
MECHANICAL DRAWING
units: mm[inches] tolerance: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm
center pin terminal 1 terminal 2 terminal 3 plastic
MATERIAL copper brass copper alloy brass PBT
PLATING nickel tin tin tin
6.40
2.50 0.098
9.3 0.366 7.3 0.287
2.60 0.102
14.5 0.571 8.5 0.336
20.0 0.787 0.3
11.30 0.445
1 3.00 0.118
3.0 0.118 3 2 5.8 0.228
2.30 0.091 (2 PLCS)
1.00X3.50 (3 PLCS) 3.0 0.118
5.8 0.228
1 3
2
2.30 0.091 (2 PLCS)
14.5 0.571
9.0 0.354
4.4 0.173
4.9 0.193
1.4 0.055 1.5 0.059
PCB LAYOUT FRONT VIEW
MATING PLUG Jack Insertion Depth: 7.3 mm
SCHEMATIC
Model Center Pin
4.9 0.193 2.90 0.114
1.4 0.055 1.5 0.060 2.80 0.110
PJ-010B Ø2.5 mm
1 3 2
Note:
1. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted.
cui.com
For more information, please visit the product page | For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-010B │ DESCRIPTION: DC POWER JACK
date 11/01/2013│ page 3 of 3
REVISION HISTORY
rev.
1.0 1.01
description
date
initial release
04/17/2006
applied new spec template
11/01/2013
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899
Fax 503.612.2383 cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
.