Silicon Rectifier
TOSHIBA Rectifier Silicon Diffused Type
1S1834,1S1835
1S1834,1S1835
High Speed Rectifier Applications (fast recovery)
...
Description
TOSHIBA Rectifier Silicon Diffused Type
1S1834,1S1835
1S1834,1S1835
High Speed Rectifier Applications (fast recovery)
Unit: mm
· Average Forward Current: IF (AV) = 1.0 A (Ta = 50°C) · Repetitive Peak Reverse Voltage: VRRM = 400, 600 V · Reverse Recovery Time: trr (1) = 1.5 µs
trr (2) = 0.35 µs · Plastic Mold Type.
Maximum Ratings (Ta = 25°C)
Characteristics
Repetitive peak reverse voltage
1S1834 1S1835
Reverse voltage (DC)
1S1834 1S1835
Average forward current (Ta = 50°C)
Peak one cycle surge forward current (non repetitive)
Junction temperature Storage temperature range
Symbol
VRRM
VR IF (AV) IFSM
Tj Tstg
Rating
400 600 300 500 1.0 60 (50 Hz) 66 (60 Hz) -40 to 125 -40 to 125
Electrical Characteristics (Ta = 25°C)
Unit V
V A A °C °C
JEDEC
DO-15
JEITA
SC-39
TOSHIBA
3-3B1A
Weight: 0.42 g (typ.)
Characteristics
Symbol
Test Condition
Min Typ. Max Unit
Peak forward voltage Repetitive peak reverse current
Reverse recovery time Forward recovery voltage
VFM IRRM (1) IRRM (2)
trr (1) trr (2) Vfr
IFM = 1.5 A VRRM = Rated VRRM = Rated, Tj = 125°C IF = 20 mA, IR = 1 mA IF = 20 mA, IR = 20 mA IF = 0.1 A, tr = 100 ns, tw = 5 ms
¾ ¾ 1.2 V
¾ ¾ 10 mA
¾ ¾ 500
¾ ¾ 1.5 ms
¾ ¾ 0.35
¾¾ 6 V
Note 1: Lead diameter not controlled in this zone to allow for flash, lead finish build-up, and minor irregularities other than slugs.
Note 2: Soldering: 5 mm is the minimum to be kept between case and soldering part.
Note 3: Lead bending: 5 mm is the minimum to be kept from the ...
Similar Datasheet