Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● Dual rectifier construction, ...
Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● Dual rectifier construction, positive center tap ● Low forward voltage, high efficiency ● Guarding for over voltage protection
MBRB10200CT
Schottky Barrier Rectifier Reverse Voltage 200 V Forward Current 10 A
Package: TO-263
Mechanical Data
● Case: epoxy, molded ● Weight: 1.4grams (approximately)
● Lead temperature for soldering purpose: 260°C max. for 10 sec ● 50 units per plastic tube or 800 pcs per reel
Schematic Diagram
Maximum Ratings & Electrical Characteristics
(TA=25°C unless otherwise noted)
Parameter
Test Conditions
Symbol
Maximum Repetitive Peak Reverse Voltage
VRRM
Working Peak Reverse Voltage
VRWM
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current @ Tc=105°C
Total Device Per Diode
IF(AV)
Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed on Rated Load per Diode
IFSM
Peak repetitive Reverse Current Per Leg at tp=2.0μs ,1KHz Voltage Rate of Change (rated VR)
IRRM DV/dt
Operating Junction Temperature Range
TJ
Storage Temperature Range
TSTG
Maximum Instantaneous Forward Voltage per Leg
IF=5A IF=5A
TC=25°C TC=125°C
VF
Maximum Reverse Current per Leg at Working Peak Reverse Voltage
Thermal Characteristics (TA=25°C unless otherwise noted) Symbol Parameter
TJ=25°C TJ=100°C
IR
Typ.(TO-263)
RθJC Thermal Resistance, Junction to Case per Leg
2.0
RθJA Thermal Resistance, Junction to Ambient per Leg
62.5
Value
...
