Document
SL22B thru SL210B
Surface Mount Schottky Rectifier
Reverse Voltage 20 - 100V Forward Current 2A
FEATURES
• Ideal for automated placement • Low forward voltage drop • Low leakage current • Meets environmental standard MIL-S-19500D • Moisture sensitivity:level 1, per J-STD-020 • Solder dip 275 °C, 10s • Compliant to RoHS Directive 2002/95/EC and
in accordance to WEEE 2002/96/EC
Package: DO-214AA (SMB)
APPLICATIONS For use in general purpose rectification of lighting, power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication.
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM
VF TJ max.
2A 20 V to 100 V
45A 0.42V 0.47V 0.72V
125 °C 150°C
MECHANICAL DATA Case: DO-214AA, molded epoxy body Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22B-106 Polarity: Laser Band Denotes Cathode Band
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Maximum RMS voltage
SYMBOL VRRM VRMS
SL22B SL23B SL24B SL25B SL26B SL27B SL28B SL29B SL210B 20 30 40 50 60 70 80 90 100 14 21 28 35 42 49 56 63 70
Maximum DC blocking voltage
Maximum average forward rectified current at TL (See Fig.1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction temperature range
Storage temperature range
VDC IF(AV)
IFSM TJ TSTG
20 30 40 - 55 to + 125
50 60 70 80 2
45 - 55 to + 150
- 55 to + 150
90
100
UNIT
V V V A
A °C °C
1/3
SL22B thru SL210B
Surface Mount Schottky Rectifier
Reverse Voltage 20 - 100V Forward Current 2A
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance
TEST CONDITIONS
SYMBOL
IF=2A
VF
TA=25 TA=100 4.0 V, 1 MHz
IR CJ
SL22B SL23B SL24B SL25B SL26B
0.42
0.47
0.2 20
175
SL27B SL28B SL29B SL210B
0.15 TBD
0.72
UNIT V mA pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SL22B SL23B SL24B SL25B SL26B
Maximum thermal resistance
RθJA (1) RθJT (2)
72 22
SL27B
SL28B
SL29B SL210B
Notes: (1) Thermal resistance from junction to ambient, 0.276x 0.276 inch (7.0x7.0mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.276×0.276 inch (7.0×7.0mm) copper pads to each terminal
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
UNIT °C/W
Figure 1. Forward Current Derating Curve
Figure 2.Maximum Non‐repetitive Peak Forward Surge Current
Figure 3. Typical Instantaneous Forward Characteristics
2/3
Figure 4. Typical Reverse Characteristics
SL22B thru SL210B
Surface Mount Schottky Rectifier Reverse Voltage 20 - 100V Forward Current 2A
Figure 5. Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
www.goodarksemi.com
3/3
Doc.USSL22B-SL210Bx2.0
.