High Isolation SPDT Switch
High Isolation SPDT Switch DC to 15 GHz Die
ADH232S
1.0 SCOPE
This specification documents the detail requirements for ...
Description
High Isolation SPDT Switch DC to 15 GHz Die
ADH232S
1.0 SCOPE
This specification documents the detail requirements for space qualified die per MIL-PRF-38534 class K except as modified herein.
The manufacturing flow described in the SPACE DIE BROCHURE is to be considered a part of this specification.
This datasheet specifically details the space grade version of this product. A more detailed operational description and a complete datasheet for commercial product grades can be found at www.analog.com/HMC232
2.0 Part Number. The complete part number(s) of this specification follow:
Part Number HMC8800
Description DC-15GHz High Isolation SPDT Switch Die
3.0 Die Information 3.1 Die Dimensions
Die Size
3.2 Die Picture
41 mil x 81 mil
Die Thickness 4 mil ± 0.5 mil
Control Input
Signal Path State
A
B
RFC to RF1
RFC to RF2
High Low
Low High
ON OFF
OFF ON
Caution: Do not “Hot Switch” power levels greater than +26 dBm (VCTL = 0/-5 VDC)
Bond Pad and Backside Metalization
Au
1. RF1* 2. A** 3. B** 4. RFC* 5. A** 6. B** 7. RF2* 8. A** 9. B** 10. A** Die bottom must be connected to RF
ground No connection required for unlabeled pads * (DC coupled, matched to 50 ohms,
blocking cap required if RF line potential not equal to 0V) ** Using any one of the A and any one of the B Pads connection is acceptable
ASD0016558
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for ...
Similar Datasheet