132 x 64 Dot Matrix OLED/PLED Segment/Common Driver
SH1106
Preliminary
132 X 64 Dot Matrix OLED/PLED Segment/Common Driver with Controller
Features Support maximum 132...
Description
SH1106
Preliminary
132 X 64 Dot Matrix OLED/PLED Segment/Common Driver with Controller
Features Support maximum 132 X 64 dot matrix panel Embedded 132 X 64 bits SRAM Operating voltage:
- Logic voltage supply: VDD1 = 1.65V - 3.5V - DC-DC voltage supply: VDD2 = 3.0V – 4.2V - OLED Operating voltage supply:
External VPP supply = 6.4V - 13.0V Internal VPP generator = 6.4V - 9.0V
Maximum segment output current: 200μA Maximum common sink current: 27mA 8-bit 6800-series parallel interface, 8-bit 8080-series
parallel interface, 3-wire & 4-wire serial peripheral interface, 400KHz fast I2C bus interface Programmable frame frequency and multiplexing ratio
Row re-mapping and column re-mapping (ADC) Vertical scrolling On-chip oscillator Programmable Internal charge pump circuit output 256-step contrast control on monochrome passive OLED
panel Low power consumption
- Sleep mode: <5μA - VDD1=0V,VDD2=3.0V – 4.2V: <5μA
- VDD1,2=0V,VPP=3.0V – 4.2V: <5μA
Wide range of operating temperatures: -40 to +85°C Available in COG form, thickness: 300μm
General Description
SH1106 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. SH1106 consists of 132 segments, 64 commons that can support a maximum display resolution of 132 X 64. It is designed for Common Cathode type OLED panel.
SH1106 embeds with contrast control, display RAM oscillator and efficient DC-DC converter, which reduces the num...
Similar Datasheet