Transient Voltage Suppressor Diodes
SA SERIES
Features
Transient Voltage Suppressor Diodes
Voltage Range 5.0 to 170 Volts 500 Watts Peak Power 1.0 Watt St...
Description
SA SERIES
Features
Transient Voltage Suppressor Diodes
Voltage Range 5.0 to 170 Volts 500 Watts Peak Power 1.0 Watt Steady State
DO-15
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 500W surge capability at 10 X 10us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional Typical IR less than 1μA above 10V
High temperature soldering guaranteed: 260°C / 10 seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg) tension
Mechanical Data
Case: Molded plastic Lead: Axial leads, solderable per MIL-STDLead: 202, Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.34 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Type Number
Peak Power Dissipation at TA=25OC, Tp=1ms (Note 1)
Symbol PPK
Value Minimum 500
Units Watts
Steady State Power Dissipation at TL=75 °C Lead Lengths .375”, 9.5mm (Note 2)
PD
1.0 Watts
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3)
Maximum Instantaneous Forward Voltage at 35.0A for Unidirectional Only
IFSM VF
70 Amps 3.5 Volts
Operating and Storage Temperature Range
TJ, TSTG
-55 to + 175
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2.
°C
Notes: 2. Mounted o...
Similar Datasheet