PECL and LVDS Low Phase Noise VCXO
PL520-30
PECL and LVDS Low Phase Noise VCXO (for 65-130MHz Fund Xtal)
FE AT UR E S
65MHz to 130MHz Fundamental Mode C...
Description
PL520-30
PECL and LVDS Low Phase Noise VCXO (for 65-130MHz Fund Xtal)
FE AT UR E S
65MHz to 130MHz Fundamental Mode Crystals. Output range (no PLL):
65MHz – 130MHz (3.3V). 65MHz – 105MHz (2.5V). Low Injection Power for crystal 50uW. Complementary outputs: PECL or LVDS. Selectable OE Logic Integrated variable capacitors. Supports 2.5V or 3.3V-Power Supply. Available in die form. Thickness 10 mil.
DESCRIPTION
The PL520-30 is a VCXO IC specifically designed to pull frequency fundamental crystals from 65MHz to 130MHz, with selectable PECL or LVDS outputs and OE logic (enable high or enable low). Its design was optimized to tolerate higher limits of interelectrodes capacitance and bonding capacitance to improve yield. It achieves very low current into the crystal resulting in better overall stability. Its internal varicaps allow an on chip frequency pulling, controlled by the VCON input.
BLOCK DIAGRAM
VCON Oscillator
Amplifier w/
XIN integrated
varicaps
XOUT
OE Q Q
PL520-30
62 mil
DIE CONFIGURATION
65 mil
OESEL^ VDD VDD VDD VDD N/C Reserved Reserved
25 24 23 22 21 20 19 18
XIN 26 XOUT 27
Die ID: A1313-13B
N/C 28
N/C 29
OE 30
CTRL
VCON 31
C502A
12345 6 78
(1550,1475) 17 GNDBUF 16 N/C
15 LVDSB
14 PECLB
13 VDDBUF 12 VDDBUF 11 PECL
10 LVDS 9 OUTSEL^
Y (0,0) X
GND GND GND GND GND Reserved GNDBUF GNDBUF
DIE SPECIFICATIONS
Name
Size Reverse side Pad dimensions
Th ic kn e s s
Value
62 x 65 mil GND
80 m icron x 80 micron 10 mil
OUTPUT SELECTION A...
Similar Datasheet