Programmable Spread Spectrum Clock
PicoEMITM Programmable Spread Spectrum Clock
FEATURES
Advanced programmable Spread Spectrum clock generator with 16 m...
Description
PicoEMITM Programmable Spread Spectrum Clock
FEATURES
Advanced programmable Spread Spectrum clock generator with 16 modulation steps to choose from
Programmable SST Modulation Magnitude: o Center Spread: ±0.125% to ±2.0% in ±0.125% steps o Down Spread: -0.25% to -4.0% in 0.25% steps
Input Frequency Range: o Fundamental Crystal: 10MHz to 40MHz
Output Frequency Range: o 1MHz to 200MHz @ 3.3V operation o 1MHz to 166MHz @ 2.5V operation
Programmable Output Drive (4mA, 8mA, 16mA) Low Cycle to Cycle jitter, 100pS Single 2.5V to 3.3V, ± 10% power supply Available in Die form
DESCRIPTION
The PL671-00 is an advanced programmable Spread Spectrum clock generator (PSSCG), and a member of PhaseLink’s PicoPLL Programmable Clock family.
The PL671-00 clock outputs can be programmed up to 200MHz (3.3V) or 166MHz (2.5V), and has 16 modulation magnitudes (±0.125 to ±2.0% or -0.25 to -4.0%) to choose from for use in Center or Down Spread modulation applications. In addition, 2 configuration pins can be programmed to allow cycling the device through 4 preprogrammed states*. The option of being able to turn ‘ON/OFF’ the Spread Spectrum modulation allows for completing a design with PL671-00 and having the assurance of turning ‘ON’ the EMI modulation if EMI becomes an issue*. The PL671-00’s spread spectrum modulation greatly reduces the fundamental and harmonic frequencies’ peak magnitude, reducing the system level electromagnetic radiation by as much as 20dB.
*Note: Requires 6-pa...
Similar Datasheet