DatasheetsPDF.com

PIC16F1708 Dataheets PDF



Part Number PIC16F1708
Manufacturers Microchip
Logo Microchip
Description 14/20-Pin 8-Bit Advanced Analog Flash Microcontrollers
Datasheet PIC16F1708 DatasheetPIC16F1708 Datasheet (PDF)

PIC16(L)F1704/8 14/20-Pin 8-Bit Advanced Analog Flash Microcontrollers High-Performance RISC CPU • C Compiler Optimized Architecture • Only 49 Instructions • Up to 14 Kbytes Linear Program Memory Addressing • Operating Speed: - DC – 32 MHz - DC – 125 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs .

  PIC16F1708   PIC16F1708



Document
PIC16(L)F1704/8 14/20-Pin 8-Bit Advanced Analog Flash Microcontrollers High-Performance RISC CPU • C Compiler Optimized Architecture • Only 49 Instructions • Up to 14 Kbytes Linear Program Memory Addressing • Operating Speed: - DC – 32 MHz - DC – 125 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory • High-Endurance Flash Data Memory (HEF) - 128 bytes of nonvolatile data storage - 100k erase/write cycles Flexible Oscillator Structure • 16 MHz Internal Oscillator Block: - Accurate to ±1%, typical - Software selectable frequency range from 16 MHz to 250 kHz - PLL multiplier to 32 MHz • 31 kHz Low-Power Internal Oscillator • External Oscillator Block with: - Three crystal/resonator modes up to 20 MHz - Three external clock modes up to 20 MHz • Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops • Two-Speed Oscillator Start-up • Oscillator Start-up Timer (OST) eXtreme Low-Power (XLP) Features • Sleep mode: 50 nA @ 1.8V, typical • Watchdog Timer: 500 nA @ 1.8V, typical • Secondary Oscillator: 500 nA @ 32 kHz • Operating Current: - 8 µA @ 32 kHz, 1.8V, typical - 32 µA/MHz @ 1.8V, typical Special Microcontroller Features • Operating Voltage Range: - 1.8V-3.6V (PIC16LF1704/8) - 2.3V-5.5V (PIC16F1704/8) • Temperature Range: - Industrial: -40°C to 85°C - Extended: -40°C to 125°C • Power-on Reset (POR) • Low Power Brown-Out Reset (LPBOR) • Extended Watch-Dog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Power-Saving Sleep mode Digital Peripheral Features • Up to 17 I/O Pins and one Input-only Pin: - High current sink/source for LED drivers - Individually programmable weak pull-ups - Interrupt-on-change pin option with edge selectable option • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Dedicated low-power 32 kHz oscillator driver • Timer2: - Up to three (TMR2/4/6) - 8-Bit Timer/Counter - 8-Bit Period Register - Prescaler and Postscaler • Capture, Compare, PWM (CCP) Module • Master Synchronous Serial Port (SSP) with SPI and I2C with: - 7-bit address masking - SMBus/PMBusTM compatibility • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART): - RS-232, RS-485 and LIN compatible - Auto-Baud Detect - Auto-wake-up on Start  2013-2015 Microchip Technology Inc. DS40001715D-page 1 PIC16(L)F1704/8 Digital Peripheral Features (Continued) • Complementary Output Generator (COG): - Push-Pull, Full Bridge, and Steering modes - Dedicated Rise/Fall Input Triggers - Dedicated Deadtime Delay Counters - Dedicated Phase Delay .


PIC16F1704 PIC16F1708 PIC16LF1704


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)