Document
MX036 SEVEN SEGMENT DISPLAY 7”
FEATURES:
-Display dimensions : 100x180 mm. or 4x7 inch. -PCB dimensions : 136x192 mm. or 5.4x7.7 inch. -Power supply : 12 Vdc. or 24Vdc. (select jumber). -Consist : 20 LED’s per segment and 5 LED’s for the decimal point (p). -At 12Vdc. A segment current ≈ 60 mA.
A decimal point (p) current ≈ 15mA. Total current ≈ 435mA. -At 24Vdc. A segment current ≈ 30 mA. A decimal point (p) current ≈ 15mA. Total current ≈ 225mA.
USING:
- Connect the seven segment driver to the display at the copper-side of printed circuit board and you can select the common cathode and the common anode for using the display.
THE CIRCUIT DIAGRAM OF a,b,c,d,e,f,g point
THE CIRCUIT DIAGRAM J1-J8 Jumper
OF p (decimal point)
use for 12 Vdc.
use for 24 Vdc.
DISPLAY
MX036 ตวั เลขจมั โบ้ 7 นว้ิ
คณุ สมบตั ิ
-ขนาดตัวเลข 100x180 มม. หรือ 4x7 นิ้ว -ขนาดแผ่นปรน้ิ ท์ 136x192 มม. หรือ 5.4x7.5 นิ้ว -ใช้ไฟ 12 โวลทด์ ซี ี หรือ 24 โวลทด์ ซี ี (มจี ม๊ั เปอรเ์ ลอื ก) -ในแตล่ ะเซก็ เมนตจ์ ะประกอบดว้ ย LED 20 ดวง จุด P ใช้ LED 5 ดวง -ที่ 12 โวลทด์ ซี ี หนง่ึ เซ็กเมนต์ ใช้กระแสประมาณ 60 มิลลิแอมป์
จุด P ใช้กระแสประมาณ 15 มิลลิแอมป์ รวมทั้งหมดใช้กระแสประมาณ 435 มิลลิแอมป์ -ที่ 24 โวลทด์ ีซี หนง่ึ เซ็กเมนต์ ใช้กระแสประมาณ 30 มิลลิแอมป์ จุด P ใช้กระแสประมาณ 15 มิลลิแอมป์ รวมทั้งหมดใช้กระแสประมาณ 225 มิลลิแอมป์
การใชง้ าน
-จุดต่อใช้งานของดิสเพลย์จะอยู่ด้านลายทองแดงของแผ่นปริ้นท์ และการต่อใช้งานสามารถเลือกคอมมอนได้ตามต้องการ
d e f ag b c pv
A K
common K
CONNECT THE COMMON CATHODE.
A
K common A
d e f ag b c p v CONNECT THE COMMON ANODE.
NOTE: Can be used with our modules : MX007 (input voltage : more than 4.5 V.)
.