1SMB5924BT3

MOTOROLA SEMICONDUCTOR TECHNICAL DATA 3 Watt Plastic Surface Mount Silicon Zener Diodes This complete new line of 3 Watt Zener Diodes offers the following advantages. Specification Features: A Complete Voltage Range — 3.3 to 200 Volts Flat Handling Surface for Accurate Placement Package Design for Top Side or Bottom Circuit Board Mounting Available in Tape and Reel Mechanical Characteristics: CASE: Void-free, transfer-molded plastic MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 seconds FINISH: All external surfaces are corrosion resistant with readily solderable leads POLARITY: Cathode indicated by molded polarity notch. When operated in zener mode, cathode will be positive with respect to anode. MOUNTING POSITION: Any WEIGHT: Modified L-Bend providing more contact area to bond pad WAFER FAB LOCATION: Phoenix, Arizona ASSEMBLY/TEST LOCATION: Seremban, Malaysia 1SMB5913BT3 through 1SMB5956BT3 PLASTIC SURFACE MOUNT ZENER DIODES 3 WATTS 3.3–200 VOLTS CASE 403A PLASTIC MAXIMUM RATINGS Rating DC Power Dissipation @ TL = 75°C, Measured at Zero Lead Length Derate above 75°C DC Power Dissipation @ TA = 25°C* Derate above 25°C Operating and Storage Junction Temperature Range *FR4 Board, within 1″ to device, using Motorola minimum recommended footprint, as shown in case 403A outline dimensions spec. Symbol PD PD TJ, Tstg Value 3 40 830 6.6 – 65 to +150 Unit Watts mW/°C mW mW/°C °C ELECTRICAL CHARACTERISTICS (TL = 30°C unless otherwise noted.) (VF = 1.5 ...