DatasheetsPDF.com

APXE2R5ARA152MHA0G Dataheets PDF



Part Number APXE2R5ARA152MHA0G
Manufacturers NIPPON CHEMI-CON
Logo NIPPON CHEMI-CON
Description CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Datasheet APXE2R5ARA152MHA0G DatasheetAPXE2R5ARA152MHA0G Datasheet (PDF)

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount PXENPCAPTM- Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXA series.) ・Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700µF ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDEL.

  APXE2R5ARA152MHA0G   APXE2R5ARA152MHA0G



Document
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount PXENPCAPTM- Series ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXA series.) ・Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 2,700µF ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS PXF P34 Lower ESR PXE Lower ESR PXA P38 Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tan ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105℃ 2.5 to 16Vdc ±20% (M) Rated voltage×1.15 Shall not exceed values shown in STANDARD RATINGS. (at 20℃, 120Hz) (at 105℃) (at 20℃ after 2 minutes) 0.12 max. (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Bias Humidity Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Surge Voltage Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Failure Rate Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] ◆MARKING ●Terminal Code : A W 0.3max. L±0.3 (Note) A±0.2 (Note) L±0.5 for HA0, HC0, JA0, JC0 Size Code φD L A B C W E61 5 5.8 5.3 5.3 5.9 0.5 to 0.8 F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 H70 8 6.7 8.3 8.3 9.0 0.7 to 1.1 H80 8 7.7 8.3 8.3 9.0 0.7 to 1.1 HA0 8 10.0 8.3 8.3 9.0 0.7 to 1.1 HC0 8 12.0 8.3 8.3 9.0 0.7 to 1.1 J80 10 7.7 10.3 10.3 11.0 0.7 to 1.1 JA0 10 10.0 10.3 10.3 11.0 0.7 to 1.1 JC0 10 12.2 10.3 10.3 11.0 0.7 to 1.1 P 1.4 1.9 1.9 3.1 3.1 3.1 3.1 4.5 4.5 4.5 EX) 2.5V390µF E49A 390 2.5V ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PXE A RA M G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" φD±0.5 B±0.2 P C±0.2 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 36 CAT. No. E1001O CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount PXENPCAPTM- Series ◆STANDARD RATINGS WV (Vdc) 2.5 4 6.3 10 16 Cap (µF) 180 390 470 560 560 680 820 820 1,000 1,200 1,500 1,500 2,200 2,700 100 150 270 330 390 470 560 680 1,000 1,000 1,200 1,200 1,500 1,800 1,800 100 120 220 270 330 330 390 470 820 820 820 1,200 1,500 1,500 47 56 68 120 150 220 270 330 390 470 680 33 39 68 82 100 100 120 150 180 220 220 330 Size code E61 F61 F80 F80 H70 H70 H80 HC0 H80 J80 HA0 HC0 JA0 JC0 E61 E61 F61 F61 F80 H70 H70 H80 HA0 J80 HC0 JA0 JA0 JA0 JC0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HC0 J80 JA0 JA0 JC0 E61 E61 E61 F61 F80 H70 H70 H80 HA0 J80 JA0 E61 E61 F61 F80 F80 H70 H70 H80 HA0 HA0 J80 JA0 Leakage current (µA max./after 2min.) 90.0 195 235 280 280 340 410 410 500 600 750 750 1,100 1,350 80.0 120 216 264 312 376 448 544 800 800 960 960 1,200 1,440 1,440 126 151 277 340 415 415 491 592 1,030 1,030 1,030 1,510 1,890 1,890 94.0 112 136 240 300 440 540 660 780 940 1,360 105 124 217 262 320 320 384 480 576 704 704 1,050 ESR Rated ripple current (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz) 21 2,670 15 3,160 13 3,600 13 3,600 13 4,100 13 4,100 12 4,260 9 5,400 12 4,260 13 4,450 10 5,220 9 5,400 10 5,500 9 5,600 22 2,610 22 2,610 15 3,160 15 3,160 14 3,470 14 3.


APXE2R5ARA122MJ80G APXE2R5ARA152MHA0G APXE2R5ARA152MHC0G


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)