LongPlay Headphone Amplifier
NCP2815
NOCAPt LongPlay
Headphone Amplifier
NCP2815 is a dual LongPlay true ground headphone amplifier designed for por...
Description
NCP2815
NOCAPt LongPlay
Headphone Amplifier
NCP2815 is a dual LongPlay true ground headphone amplifier designed for portable communication device applications such as mobile phones. This part is capable of delivering 26 mW of continuous average power into a 32 W load from a 1.8 V power supply with a THD+N of 1%.
Based on the power supply delivered to the device, an internal power management block generates a symmetrical positive and negative voltage. Thus, the internal amplifiers provide outputs referenced to Ground and the losses are reduced which helps to increase the battery life. In this NOCAP configuration, the two external heavy coupling capacitors can be removed. This provides a significant space and cost savings compared to a typical stereo application.
NCP2815 is available with an external adjustable gain (version A), or internal gain of −1.5 V/V (version B). It reaches a superior −100 dB PSRR and noise floor. Thus, it offers high fidelity audio sound, as well as a direct connection to the battery. It contains circuitry to prevent “Pop & Click” noise that would otherwise occur during turn−on and turn−off transitions. The device is available in 12 bump CSP package (1.2 x 1.6 mm) which helps to save space on the board.
Features
NOCAP Output Eliminates DC−Blocking Capacitors:
♦ Saves Board Area ♦ Saves Component Cost ♦ No Low−Frequency Response Attenuation
LongPlay Architecture: Increase the Battery Life
High PSRR (−100 dB): Direct Connection to the Battery
“Po...
Similar Datasheet