NL17SH125

NL17SH125 Non-Inverting 3-State Buffer The NL17SH125 MiniGatet is an advanced high−speed CMOS non−inverting buffer in ultra−small footprint. The NL17SH125 requires the 3−state control input (OE) to be set High to place the output in the high impedance state. The NL17SH125 input structures provide protection when voltages up to 7.0 V are applied, regardless of the supply voltage. Features High Speed: tPD = 3.8 ns (Typ) at VCC = 5.0 V Low Power Dissipation: ICC = 1.0 mA (Max) at TA = 25°C Power Down Protection Provided on Inputs Balanced Propagation Delays These are Pb−Free and Halide−Free Devices http://onsemi.com MARKING DIAGRAM SOT−953 CASE 527AE 1 T = Specific Device Code (Rotated 90°) M = Month Code T M IN A 1 GND 2 5 VCC OE 3 4 OUT Y Figure 1. Pinout (Top View) OE EN IN A OUT Y Figure 2. Logic Symbol PIN ASSIGNMENT 1 IN A 2 GND 3 OE 4 OUT Y 5 VCC Input A L H X FUNCTION TABLE Input OE Output Y LL LH HZ ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. © Semiconductor Components Industries, LLC, 2012 September, 2012 − Rev. 0 1 Publication Order Number: NL17SH125/D NL17SH125 MAXIMUM RATINGS Symbol Parameter Value Unit VCC VIN VOUT IIK IOK IOUT ICC IGND TSTG TL TJ MSL DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Source/Sink Current DC Supply Current per Supply Pin DC Ground Current per Groun...