Ordering number : ENA2083
LV8824QA
Bi-CMOS IC
For Brushless Motor Drive
PWM Driver IC
http://onsemi.com
Overview
The ...
Ordering number : ENA2083
LV8824QA
Bi-CMOS IC
For Brushless Motor Drive
PWM Driver IC
http://onsemi.com
Overview
The LV8824QA is a PWM pre-driver IC suitable for use in 3-phase brushless motors. This IC was designed based on the assumption that Nch FETs are used as the upper and lower output
transistors. The rotational speed is controllable by inputting PWM pulse or DC voltage externally and changing duty. LV8824QA incorporates latch-type constraint protection circuit.
Features
IO max = 50mA Speed control and synchronous rectification by PWM direct input (3.3V input-ready) and DC voltage. 3-Hall FG output Latch type constraint protection circuit (latch is released by S/B and F/R.) Forward/reverse switch circuit, Hall bias pin Power saving circuit Current limiter circuit, Low-voltage protection circuit, Thermal shut-down circuit Charge pump circuit (external Nch/Nch), 5V
regulator output. Start/Brake circuit
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
Output current Allowable power dissipation
VCC max VG max IO max Pd max
VCC pin VG pin
Mounted on a circuit board.*1
34 42 50 1.45
V V mA W
Junction temperature
Tj max
150 °C
Operating temperature
Topr
-40 to +105 °C
Storage temperature
Tstg
-55 to +150 °C
*1 : Specified circuit board : 100mm × 100mm × 1.6mm, glass epoxy (double-layer board) Caution 1) Absolute maximum ratings represent the value which cannot be exceeded fo...