LV8411GR

Ordering number : ENA1250A LV8411GR Bi-CMOS LSI For DSC, and Cell Phone Camera Modules 4-channel Single-chip Motor Driver IC http://onsemi.com Overview The LV8411GR is an H bridge motor driver IC and is able to control 4 modes of forward, reverse, brake, and standby. This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Features Saturation drive H bridge: 4 channels Built-in thermal protection circuit Built-in low voltage malfunction prevention circuit Incorporates a transistor for driving photosensors Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Power supply voltage 1 Power supply voltage 2 Output peak current Output continuous current 1 Output continuous current 2 Allowable power dissipation VM max VCC max IO peak IO max1 IO max2 Pd max Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20% Channels 1 to 4 PI1 Mounted on a circuit board* 6.0 V 6.0 V 600 mA 400 mA 30 mA 1.05 W Operating temperature Topr -40 to +85 °C Storage temperature Tstg -55 to +150 °C * Specified circuit board : 40mm×50mm×0.8mm : glass epoxy four-layer board Caution 1) Absolute maximum ratings represent the value which cannot be exceeded for any length of time. Caution 2) Even when the device is used within the range of absolute maximum ratings, as a result of continuous usage under high temperature, high current, high voltage, or drastic temperature...