Preliminary – LD6356
Low-Dropout Regulators
Features
High current capability: 1.5a Low-dropout voltage: 350mv Low...
Preliminary – LD6356
Low-Dropout
Regulators
Features
High current capability: 1.5a Low-dropout voltage: 350mv Low ground current Accurate 1% guaranteed tolerance Extremely fast transient response Reverse-battery and “load dump” protection Zero-current shutdown mode (5-pin versions) Error flag signals output out-of-regulation (5-pin versions) Also characterized for smaller loads with industry- leading
performance specifications Fixed voltage and adjustable versions
Applications
Battery powered equipment High-efficiency “green” computer systems Automotive electronics High-efficiency linear power supplies High-efficiency post-
regulator for switching supply
General Description
The LD6356 are high current, high accuracy, lowdropout voltage
regulators. Using process with a
PNP pass element, these
regulators feature 350mV (full load) dropout voltages and very low ground current. These devices also find applications in lower current, low dropout-critical systems, where their tiny dropout voltage and ground current values are important attributes. The LD6356 are fully protected against over current faults, reversed input polarity, reversed lead insertion, over temperature operation, and positive and negative transient voltage spikes. Five pin fixed voltage versions feature logic level ON/OFF control and an error flag which signals whenever the output falls out of regulation. On the MIC29151 and MIC29152, the ENABLE pin maybe tied to VIN if it is not req...