Document
MBR2040DC~MBR20200DC
20 AMPERES SCHOTTKY BARRIER RECTIFIERS VOLTAGE 40 to 200 Volt CURRENT 20 Ampere
FEATURES • Plastic package has Underwriters Laboratory
Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. • Low power loss, high efficiency. • High current capability • For use in low voltage,high frequency inverters free wheeling , and polarlity protection applications. • Lead free in compliance with EU RoHS 2011/65/EU directive
MECHANICALDATA • Case: TO-263 / D2PAK molded plastic • Terminals: solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: As marked. • Weight: 0.0515 ounces, 1.46 grams.
0.409(10.4) 0.387(9.80)
0.357(9.1) 0.335(8.5) 0.418(10.6) 0.378(9.60)
0 . 11 0 ( 2 . 8 )
0.055(1.4) 0.039(1.0) 0.108(2.75) 0.092(2.35)
0.236(6.0) 0.197(5.0)
0.035(0.9)MAX.
0.108(2.75) 0.092(2.35)
0.189(4.8) 0.137(4.4) 0.055(1.4) 0.047(1.2)
0.026(0.7) 0 . 0 11 ( 0 . 3 )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
PARAMETER
S YMB OL MB R2040DC MBR2045DC MB R2050DC MBR2060DC MB R2080D C MBR2090DC MB R20100DC MBR20150DC MBR20200DC UNITS
Maximum Recurrent Peak Reverse Voltage
V RRM
40
45
50
60
80
90
100
150
200 V
Maximum RMS Voltage
VRMS 28 31.5 35 42 56 63 70 105 140 V
Maximum DC Blocking Voltage
VDC 40 45 50 60 80 90 100 150 200 V
Maximum Average Forward Current (See fig.1)
Peak Forward Surge Current :8.3ms single half sinewave superimposed on rated load
IF(AV) I
FSM
Maximum Forward Voltage at 10A, per leg
VF
Maxi mum D C Reverse C urrent at Rated DC Tc=25 OC
Blocking Voltage
Tc = 1 2 5 OC
IR
Typical Thermal Resistance
RθJC
Operati ng Juncti on Temperature Range
TJ
0.7
20
200
0.75 0.8 0.05 20 2
-50 to + 150
A
A
0.9 V
mA OC / W OC
S torage Temperature Range
TSTG
-50 to + 150
OC
Notes : Both Bonding and Chip structure are available.
August 3,2015-REV.01
PAGE . 1
MBR2040DC~MBR20200DC
RATING AND CHARACTERISTIC CURVES
AVERAGE FORWARD CURRENT, Amps
25.0 20.0 15.0 10.0
5.0 0 0
50 100 CASE TEMPERATURE, OC
150
Fig.1- FORWARD CURRENT DERATING CURVE
INSTANTANEOUS REVERSE CURRENT, mA
10
TC=125OC
1.0
0.1 TC=75OC
0.01
TC=25OC
0.001
20 40 60 80 100
PERCENT OF INSTANTANEOUS REVERSE VOLTAGE, %
Fig.3- TYPICAL REVERSE CHARACTERISTICS
PEAK FORWARD SURGE CURRENT, Amps
240 210 180 150 120
90 60 30
0 1
8.3ms Single Half Since-Wave JEDEC Method
2
5 10 20
50
NO. OF CYCLE AT 60Hz
100
Fig.2- MAXIMUM NON - REPETITIVE SURGE CURRENT
FORWARD CURRENT, Amps
40
40-45V
10 8 6 4
2
1.0 .8 .6 .4
.2
.1
.4 .5 .6
50-60V 80-100V 150-200V
TJ = 25OC Pulse Width = 300 us 1% Duty Cycle
.7 .8 0.9 1.0 1.1
FORWARD VOLTAGE, VOLTS
Fig.4- TYPICAL INSTANTANEOUS FORWARD CHRACTERISTICS
August 3,2015REV.01
PAGE . 2
MBR2040DC~MBR20200DC
MOUNTING PAD LAYOUT
ORDER INFORMATION • Packing information
T/R - 0.8K per 13" plastic Reel
August 3,2015-REV.01
PAGE . 3
MBR2040DC~MBR20200DC
Part No_packing code_Version MBR2040DC_T0_00001 MBR2040DC_T0_10001
For example : RB500V-40_R2_00001
Part No.
Serial number Version code means HF Packing size code means 13" Packing type means T/R
Packing Code XX
Version Code XXXXX
Packing type
1st Code
Packing size code
2nd Code HF or RoHS 1st Code 2nd~5th Code
Tape and Ammunition Box (T/B)
A
N/A
0
Tape and Reel (T/R)
R
7"
1
Bulk Packing (B/P)
B
13"
2
Tube Packing (T/P)
T
26mm
X
Tape and Reel (Right Oriented) (TRR)
S
52mm
Y
Tape and Reel (Left Oriented) (TRL)
L
PANASERT T/B CATHODE UP (PBCU)
U
FORMING
F
PANASERT T/B CATHODE DOWN (PBCD)
D
HF RoHS
0 serial number 1 serial number
August 3,2015-REV.01
PAGE . 4
MBR2040DC~MBR20200DC
Disclaimer
• Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
• Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest document.
• Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
• Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
• Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
• The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instrume.