AP0202AT

‡Advance AP0202AT: Image Signal Processor (ISP) Features AP0202AT High-Dynamic Range (HDR) Image Signal Processor (ISP) AP0202AT Datasheet, Rev. 4 For the latest product datasheet, please visit www.onsemi.com Features Up to 2.0 Mp (1920x1080) ON Semiconductor sensor support 30 fps at 1080p, 45 fps at 1.2Mp, 60 fps at 720p (Optimized for operation with HDR sensors) Color and gamma correction Auto exposure, auto white balance, 50/60 Hz auto flicker detection and avoidance Adaptive Local Tone Mapping (ALTM) Two-wire serial programming interface (CCIS) Parallel output Configurable through low-cost SPI Flash and EEPROM devices High-level host command interface Standalone operation supported Up to 7 GPIO Fail-safe IO Multi-Camera synchronization support Applications Surround, rear and front view cameras Blind spot / side mirror replacement cameras Automotive viewing/processing fusion cameras Table 1: Key Performance Parameters Parameter Image sensor interfaces Input Data FOrmat Value Parallel and HiSPi Parallel: 12 bit SDR (linear) or 12 bit HDR companded. Output interface Output format Maximum resolution Input clock range Output pixel clock maximum Supply voltage Operating temp. (Ambient) Power consumption HiSPI: 12 bit SDR (linear) or 12/14 bit HDR companded Up to 24-bit parallel1 RGB888, RGB565, YUV422 8-/10-bit1 1920 x 1080 (2.0 Mp) 10 - 29 MHz 125 MHz2 VDDIO_S VDDIO_H VDD_REG VDD VDD_PLL VDD_PHY VDDIO_OTPM –40°C to +105°C 1.8 or 2.8 ...