Ambient Light Sensor
NOA1305
Ambient Light Sensor with I2C Interface and Dark
Current Compensation
Description The NOA1305 ambient light se...
Description
NOA1305
Ambient Light Sensor with I2C Interface and Dark
Current Compensation
Description The NOA1305 ambient light sensor (ALS) is designed for handheld
applications and integrates a 16−bit ADC, a 2−wire I2C digital interface, internal clock oscillator and a power down mode. The built in dynamic dark current compensation and precision calibration capability coupled with excellent IR and 50/60 Hz flicker rejection enables highly accurate measurements from very low light levels to full sunlight. The device can support simple count equals lux readings in interrupt−driven or polling modes. The NOA1305 employs proprietary CMOS image sensing technology from ON Semiconductor to provide large signal to noise ratio (SNR) and wide dynamic range (DR) over the entire operating temperature range. The optical filter used with this chip provides a light response similar to that of the human eye.
Features
Senses Ambient Light and Provides an Output Count Proportional to
the Ambient Light Intensity
Photopic Spectral Response
Dynamic Dark Current Compensation IR Rejection Eliminates Need for Additional IR Photodiode
Less than 120 mA Active Power Consumption in Normal Operation
Less than 2 mA Power Dissipation in Power Down Mode Interrupt Signal Notifies Host of Significant Intensity Changes
Wide Operating Voltage Range (2.4 V to 3.6 V)
Wide Operating Temperature Range (−40°C to 85°C) Linear Response Over the Full Operating Range
Senses Intensity of Ambient Light from 0...
Similar Datasheet