4-Channel Low Capacitance Dual-Voltage ESD Protection Array
ESD7554
4Channel Low Capacitance DualVoltage ESD Protection Array
Features
• 3 Channels of Low Voltage ESD Protection ...
Description
ESD7554
4Channel Low Capacitance DualVoltage ESD Protection Array
Features
3 Channels of Low Voltage ESD Protection 1 Channel of High Voltage ESD Protection Provides ESD Protection to IEC61000−4−2 Level 4:
±8 kV Contact Discharge (Pins 1−3) ±15 kV Contact Discharge (Pin 4)
Low Channel Input Capacitance Minimal Capacitance Change with Temperature and Voltage High Voltage Zener Diode Protects Supply Rail No Need for External Bypass Capacitors Each I/O Pin Can Withstand Over 1000 ESD Strikes* These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
8
1 WDFN8 CASE 517BC
MARKING DIAGRAM
30V MG 1G
30V = Specific Device Code M = Date Code G = Pb−Free Package
PINOUT 5 67 8
ÏÏÏÏÏÏDAPÏÏÏÏÏÏ 4 32 1 Bottom View (Pins up View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.
NOTE: Note: Pins 5, and 6 to 8 are connected to a common substrate. Figure 1. Electrical Schematic
*Standard test condition is IEC61000−4−2 level 4 test circuit with each pin subjected to ±8 kV contact discharge for 1000 pulses. Discharges are timed at 1 second intervals and all 1000 strikes are completed in one continuous test run. The part is then subjected to standard production test to verify that all of the tested parameters are within spec after the 1000 strikes.
© Semiconductor Components Industries, LLC, 2010
November, 2010 − Rev. 0
1
Publication Order Number: ESD7554/...
Similar Datasheet