ESD8118

ESD8118 ESD Protection Diode Low Capacitance Array for High Speed Data Lines The ESD8118 surge protection is specifically designed to protect four high speed data pairs from ESD. Ultra−low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flow−through style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed differential lines. Features Low Capacitance (0.35 pF Max, I/O to GND) Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4) Low ESD Clamping Voltage These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Typical Applications HDMI 1.3/1.4/2.0 Display Port MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Operating Junction Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg − 55 to +150 °C Lead Solder Temperature − Maximum (10 Seconds) TL 260 °C IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD) ESD ESD ±15 kV ±15 kV Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com MARKING DIAGRAM UDFN10 CASE 517CY ACMG G PIN CONFIGURATION I/O I/O I/O 10 9 8 I/O 7 123 I/O GND I/O 45 I/O GND 6 I/O ORDERING INFORMATION Device Package Shipping ESD...