Forward/Reverse H-bridge Driver
Ordering number : ENA1172A
LV8761V
Bi-CMOS LSI
Forward/Reverse H-bridge Driver
http://onsemi.com
Overview
The LV8761V...
Description
Ordering number : ENA1172A
LV8761V
Bi-CMOS LSI
Forward/Reverse H-bridge Driver
http://onsemi.com
Overview
The LV8761V is an H-bridge driver that can control four operation modes (forward, reverse, brake, and standby) of a motor. The low on-resistance, zero standby current, highly efficnet IC is optimal for use in driving brushed DC motors for office equipment.
Features
Forward/reverse H-bridge motor driver: 1 channel Built-in current limiter circuit Built-in thermal protection circuit Built-in short-circuit protection function Unusual condition warning output pin Short-circuit protection circuit selectable from latch-type or auto reset-type
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Supply voltage
Output peak current Output continuous current Logic input voltage Allowable power dissipation Operating temperature Storage temperature
Symbol VM max VCC max IO peak IO max
VIN Pd max
Topr Tstg
Conditions tw ≤ 20ms, duty 5% Mounted on a specified board. *
* Specified circuit board : 90mm×90mm×1.6mm, glass epoxy 2-layer board (2S0P), with backside mounting.
Ratings 38 6 4 3
-0.3 to VCC+0.3 3.15
-20 to +85 -55 to +150
Unit V V A A V W °C °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semiconductor Componen...
Similar Datasheet