Document
L2F1 thru L2F7
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A
Features
• Glass passivated fast recovery rectifiers • Ideal for automated placement • Low forward voltage drop • Low leakage current • Moisture sensitivity: level 1, per J-STD-020 • Solder dip 260 °C, 10 s • Low profile, typical thickness 1.0mm • AEC-Q101 qualified
eSGB (SMAF)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Symbol L2F1 L2F2 L2F3 L2F4 L2F5 L2F6 L2F7 Unit
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load
Operating junction and storage temperature range
VRRM 50 100 200 400 600 800 1000 V
VRMS 35 70 140 280 420 560 700 V
VDC 50 100 200 400 600 800 1000 V
IF(AV)
2.0
A
IFSM
60
A
TJ, TSTG
- 55 to + 150
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol L2F1 L2F2 L2F3 L2F4 L2F5 L2F6 L2F7 Unit
Maximum instantaneous forward voltage
IF=2 A,TA=25℃ VF
1.3
Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃
IR
5 50
Maximum reverse recovery time
IF=0.5A,IR=1.0A, Irr=0.25A
trr
150 250
Typical junction capacitance 4.0 V, 1 MHz
CJ
11
Typical thermal resistance1) juntion to mount RθJM
12
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB
500
V
µA
nS pF ℃/W
www.goodark.com
1/4
2013.12-Rev.A
L2F1 thru L2F7
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Instantaneous Forward Characteristics
Figure 5. Typical Junction Capacitance
www.goodark.com
2/4
2013.12-Rev.A
L2F1 thru L2F7
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A
Package Outline Dimensions
in inches (millimeters)
DIM Unit: mm
Unit: inch
MIN MAX MIN MAX
A 0.92 1.08 0.036 0.043
A1 0 0.1 0.000 0.004
B 1.25 1.45 0.049 0.057
C 0.1 0.25 0.004 0.010
D 2.6 2.8 0.102 0.110
E 4.1 4.3 0.161 0.169
L 0.7 1.1 0.028 0.043
HE 4.8 5.2 0.189 0.205
Soldering footprint
Packing Information
Packing quantities: 10,000 pcs/Reel,12mm Tape, 13" Reel
Tape & Reel Specification
www.goodark.com
3/4
2013.12-Rev.A
L2F1 thru L2F7
Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou GoodArk Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials.
Please .