STK672-401C-E

Ordering number : ENA2137 STK672-401C-E Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-401C-E is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications Office photocopiers, printers, etc. Features Entry of external clock is enough to activate the micro step sinusoidal driver. The excitation mode of 2, 1-2, W1-2, 2W1-2, or 4W1-2 can be selected with the external pin. The 4-phase distributor switching timing can be set to occur either on both rising and falling edge detection or on rising edge detection only with an external pin (MODE3). A phase holding function is provided to prevent phase skip during switching of excitation in the course of operation. The motor current is set by a voltage divider formed by an external resistor connected to the Vref pin. The CLK input pin is provided with an internal noise filtering circuit in addition to a Schmidt circuit to increase the margin for extraneous noise. When set low, the ENABLE pin turns off the motor drive current for all phases and retains the phase excitation state. Semiconductor Components Industries, LLC, 2013 June, 2013 O1712HKPC 018-07-0001 No.A2137-1/19 STK672-401C-E Specifications Absolute Maximum Ratings at Tc = 25°C Parameter Maximum supply voltage 1 Maximum supply voltage 2 Input voltage Output current Allowable power dissipation Operating substrate temperature Junction temperature Storage temperature Sy...