DatasheetsPDF.com

PJL9835A Dataheets PDF



Part Number PJL9835A
Manufacturers Pan Jit International
Logo Pan Jit International
Description 60V Dual P-Channel Enhancement Mode MOSFET
Datasheet PJL9835A DatasheetPJL9835A Datasheet (PDF)

PPJL9835A 60V Dual P-Channel Enhancement Mode MOSFET Voltage -60 V Current -5.5 A SOP-8 Features  RDS(ON), VGS@-10V,[email protected]<48mΩ  RDS(ON), [email protected],[email protected]<65mΩ  High switching speed  Improved dv/dt capability  Low reverse transfer capacitance  Lead free in compliance with EU RoHS 2011/65/EU directive  Green molding compound as per IEC61249 Std. (Halogen Free) Mechanical Data  Case: SOP-8 package  Terminals: Solderable per MIL-STD-750, Method 2026  Marking: L9835A Maximum R.

  PJL9835A   PJL9835A


Document
PPJL9835A 60V Dual P-Channel Enhancement Mode MOSFET Voltage -60 V Current -5.5 A SOP-8 Features  RDS(ON), VGS@-10V,[email protected]<48mΩ  RDS(ON), [email protected],[email protected]<65mΩ  High switching speed  Improved dv/dt capability  Low reverse transfer capacitance  Lead free in compliance with EU RoHS 2011/65/EU directive  Green molding compound as per IEC61249 Std. (Halogen Free) Mechanical Data  Case: SOP-8 package  Terminals: Solderable per MIL-STD-750, Method 2026  Marking: L9835A Maximum Ratings and Thermal Characteristics o (TA=25 C unless otherwise noted) PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current TA=25oC TA=70oC Pulsed Drain Current (Note 1) Power Dissipation TA=25oC TA=70oC Single Pulse Avalanche Energy (Note 5) Operating Junction and Storage Temperature Range Typical Thermal resistance - Junction to Ambient, t≦10s (Note 6) SYMBOL VDS VGS ID IDM PD EAS TJ,TSTG RθJA LIMIT -60 +20 -5.5 -4.4 -22 2.5 1.6 24 -55~150 50 UNITS V V A A W mJ oC oC/W July 21,2015-REV.00 Page 1 PPJL9835A Electrical Characteristics o (TA=25 C unless otherwise noted) PARAMETER Static Drain-Source Breakdown Voltage Gate Threshold Voltage Drain-Source On-State Resistance Drain-Source On-State Resistance Zero Gate Voltage Drain Current Gate-Source Leakage Current Dynamic (Note 7) Total Gate Charge Gate-Source Charge Gate-Drain Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Drain-Source Diode Maximum Continuous Drain-Source Diode Forward Current SYMBOL BVDSS VGS(th) RDS(on) RDS(on) IDSS IGSS Qg Qgs Qgd Ciss Coss Crss td(on) tr td(off) tf IS TEST CONDITION VGS=0V,ID=-250uA VDS=VGS,ID=-250uA VGS=-10V,ID=-5.5A VGS=-4.5V,ID=-3.0A VDS=-60V,VGS=0V VGS=+20V,VDS=0V VDS=-30V, ID=-5.5A, VGS=-10V (Note 3) VDS=-30V, VGS=0V, f=1.0MHZ VDD=-30V, ID=-1A, VGS=-10V, RG=6Ω (Note 3) --- Diode Forward Voltage VSD IS=-1.0A, VGS=0V MIN. TYP. MAX. UNITS -60 - - V -1.0 -1.7 -2.5 V - 40 48 mΩ - 55 65 mΩ - - -1.0 uA - - +100 nA - 22 - 4.1 - 5.2 - 1256 - 87 - 59 - 13 - 42 - 65 - 16 - nC pF ns - - -5.5 A - -0.72 -1.0 V NOTES : 1. Pulse width<300us, Duty cycle<2% 2. Essentially independent of operating temperature typical characteristics. 3. The maximum current rating is package limited. 4. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency and duty cycles to keep initial TJ =25°C. 5. The test condition is L=0.1mH, IAS=-22A, VDD=-25V, VGS=-10V 6. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. Mounted on a 1 inch2 with 2oz.square pad of copper. 7. Guaranteed by design, not subject to production testing. July 21,2015-REV.00 Page 2 PPJL9835A TYPICAL CHARACTERISTIC CURVES Fig.1 On-Region Characteristics Fig.2 Transfer Characteristics Fig.3 On-Resistance vs. Drain Current Fig.4 On-Resistance vs. Junction temperature Fig.5 On-Resistance Variation with VGS. July 21,2015-REV.00 Fig.6 Body Diode Characteristics Page 3 PPJL9835A TYPICAL CHARACTERISTIC CURVES Fig.7 Gate-Charge Characteristics Fig.8 Breakdown Voltage Variation vs. Temperature Fig.9 Threshold Voltage Variation with Temperature. Fig.10 Capacitance vs. Drain-Source Voltage. Fig.11 Maximum Safe Operating Area July 21,2015-REV.00 Page 4 PPJL9835A TYPICAL CHARACTERISTIC CURVES Fig.12 Normalized Transient Thermal Impedance vs. Pulse Width July 21,2015-REV.00 Page 5 PPJL9835A PART NO PACKING CODE VERSION Part No Packing Code PJL9835A_R2_00001 Package Type SOP-8 Packing type 2.5K pcs / 13” reel Marking L9835A Version Halogen free Packaging Information & Mounting Pad Layout SOP-8 Dimension Unit: mm SOP-8 PAD LAYOUT Unit: mm July 21,2015-REV.00 Page 6 PPJL9835A Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requi.


PJL9454A PJL9835A PJQ5461A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)