NOIH2SM1000A

NOIH2SM1000A HAS2 Image Sensor INTRODUCTION Scope This datasheet details the ratings, physical, geometrical, electrical and electro-optical characteristics, and test- and inspection-data for the High Accuracy Star Tracker (HAS2) CMOS active pixel image sensor (CMOS APS). The device described in this document is protected by US patent 6,225,670 and others. Component Type Values Table 10 on page 9 provides a summary of the type variants. The complete list of specifications for each type variant is given in the specifications tables. All specifications are given at 22 ±3°C, under nominal clocking and bias conditions. Exceptions are noted in the ‘Remarks’ field. Maximum Rating Table 11 on page 9 specifies the maximum ratings. Do not exceed these ratings at any times, during use or storage. Physical Dimension and Geometrical Information Figure 4 on page 24 shows the physical dimensions of the assembled component. The geometrical information in Figure 3 on page 10 describes the position of the die in the package. Pin Assignment Figure 25 on page 39 contains the pin assignment. The figure contains a schematic drawing and a pin list. A detailed functional description of each pin is available in Pin List on page 35. Soldering Instructions Soldering is restricted to manual soldering only. No wave or reflow soldering is allowed. For manual soldering, the following restrictions are applicable: Solder 1 pin on each of the four sides of the sensor. Cool down for a minimum period of 1 ...