Relay
S106-X
Zero Cross 400V / 0.8A AC Solid State Relay
Description
The S106-X is a bi-directional, single-pole, single-thro...
Description
S106-X
Zero Cross 400V / 0.8A AC Solid State Relay
Description
The S106-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor which activates an optically coupled IC on the output that controls the firing angle of two back-to-back SCRs. This circuit assures no false triggering under most adverse conditions, and a tight zero-volt switching window not exceeding 5V. The S106-X provides high peak load voltage (400V+) and high input-to-output isolation voltage (up to 5kVRMS).
The S106-X comes in a compact 6 pin DIP package, making it ideal for high-density board applications.
Applications
Valve Control Solenoid Control Home Appliances Metering Equipment Heating Elements Gas Pump Control Circuitry
Schematic Diagram
Features
Zero-Volt Cross Switching Input Series Limiting Resistor (300Ω TYP) High Blocking Voltage (400V MIN) High Transient Immunity 0.8A Maximum Continuous Current Low Input Control Current Long Life / High Reliability RoHS / Pb-Free / REACH Compliant
Agency Approvals
UL/C-UL: VDE:
File # E90096 File # 40035191 (EN 60747-5-2)
Absolute Maximum Ratings
The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage ...
Similar Datasheet