MKL26Z64VLH4

Freescale Semiconductor, Inc. Data Sheet: Technical Data Document Number: KL26P64M48SF5 Rev 5 08/2014 Kinetis KL26 Sub-Family 48 MHz Cortex-M0+ Based Microcontroller MKL26ZxxxVFM4 MKL26ZxxxVFT4 MKL26ZxxxVLH4 Designed with efficiency in mind. Compatible with all other Kinetis L families as well as Kinetis K2x family. General purpose MCU with USB 2.0, featuring market leading ultra low-power to provide developers an appropriate entry-level 32-bit solution. 32-pin QFN (FM) 48-pin QFN (FT) This product offers: 5 x 5 x 1 Pitch 0.5 mm 7 x 7 x 1 Pitch 0.5 mm Run power consumption down to 40 μA/MHz in very low power run mode Static power consumption down to 2 μA with full state retention and 4.5 μs wakeup Ultra-efficient Cortex-M0+ processor running up to 48 MHz with industry leading throughput 64-pin LQFP (LH) 10 x 10 x 1.4 Pitch 0.5 mm Memory option is up to 128 KB flash and 16 KB RAM Energy-saving architecture is optimized for low power with 90nm TFS technology, clock and power gating techniques, and zero wait state flash memory controller Performance Human-machine interface 48 MHz ARM® Cortex®-M0+ core Low-power hardware touch sensor interface (TSI) Up to 50 general-purpose input/output (GPIO) Memories and memory interfaces Up to 128 KB program flash memory Communication interfaces Up to 16 KB SRAM USB full-/low-speed On-the-Go controller with on- chip transceiver and 5 V to 3.3 V regulator System peripherals Two 16-bit SPI...