DatasheetsPDF.com

MUN2237 Dataheets PDF



Part Number MUN2237
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description Digital Transistors
Datasheet MUN2237 DatasheetMUN2237 Datasheet (PDF)

Digital Transistors (BRT) R1 = 47 kW, R2 = 22 kW NPN Transistors with Monolithic Bias Resistor Network MUN2237, MMUN2237L, MUN5237, DTC144WE, DTC144WM3, NSBC144WF3 This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. The BRT eliminates these individual component.

  MUN2237   MUN2237



Document
Digital Transistors (BRT) R1 = 47 kW, R2 = 22 kW NPN Transistors with Monolithic Bias Resistor Network MUN2237, MMUN2237L, MUN5237, DTC144WE, DTC144WM3, NSBC144WF3 This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. Features • Simplifies Circuit Design • Reduces Board Space • Reduces Component Count • NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS (TA = 25°C) Rating Symbol Max Unit Collector−Base Voltage VCBO 50 Vdc Collector−Emitter Voltage VCEO 50 Vdc Collector Current − Continuous IC 100 mAdc Input Forward Voltage VIN(fwd) 40 Vdc Input Reverse Voltage VIN(rev) 10 Vdc Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com PIN CONNECTIONS PIN 3 COLLECTOR PIN 1 BASE R1 (OUTPUT) (INPUT) R2 PIN 2 EMITTER (GROUND) MARKING DIAGRAMS XX MG G 1 SC−59 CASE 318D STYLE 1 XXX MG G 1 SOT−23 CASE 318 STYLE 6 XX MG G 1 XX M 1 SC−70/SOT−323 CASE 419 STYLE 3 SC−75 CASE 463 STYLE 1 XX M 1 XM 1 SOT−723 CASE 631AA STYLE 1 SOT−1123 CASE 524AA STYLE 1 XXX M G = Specific Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering, marking, and shipping information in the package dimensions section on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2012 September, 2019 − Rev. 6 1 Publication Order Number: DTC144W/D MUN2237, MMUN2237L, MUN5237, DTC144WE, DTC144WM3, NSBC144WF3 Table 1. ORDERING INFORMATION Device Part Marking Package Shipping† MUN2237T1G, NSVMUN2237T1G* 8P SC−59 3000 / Tape & Reel (Pb−Free) MMUN2237LT1G, NSVMMUN2237LT1G* AA3 SOT−23 (Pb−Free) 3000 / Tape & Reel MUN5237T1G, NSVMUN5237T1G* 8P SC−70/SOT−323 3000 / Tape & Reel (Pb−Free) DTC144WET1G, NSVDTC144WET1G* 8P SC−75 (Pb−Free) 3000 / Tape & Reel DTC144WM3T5G 8P SOT−723 8000 / Tape & Reel (Pb−Free) NSBC144WF3T5G Q SOT−1123 8000 / Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NSV Prefixes for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. PD, POWER DISSIPATION (mW) 300 250 200 (1) (2) (3) (4) (5) 150 100 (1) SC−75 and SC−70/SOT323; Minimum Pad (2) SC−59; Minimum Pad (3) SOT−23; Minimum Pad (4) SOT−1123; 100 mm2, 1 oz. copper trace (5) SOT−723; Minimum Pad 50 0 −50 −25 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (°C) Figure 1. Derating Curve www.onsemi.com 2 MUN2237, MMUN2237L, MUN5237, DTC144WE, DTC144WM3, NSBC144WF3 Table 2. THERMAL CHARACTERISTICS Characteristic THERMAL CHARACTERISTICS (SC−59) (MUN2237) Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SOT−23) (MMUN2237L) Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SC−70/SOT−323) (MUN5237) Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SC−75) (DTC144WE) Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Junction and Storage Temperature Range THERMAL CHARACTERISTICS (SOT−723) (DTC144WM3) Total Device Dissipation TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Junction and Storage Temperature Range 1. FR−4 @ Minimum Pad. 2. FR−4 @ 1.0 x 1.0 Inch Pad. 3. FR−4 @ 100 mm2, 1 oz. copper traces, still air. 4. FR−4 @ 500 mm2, 1 oz. copper traces, still air. Symbol Max Unit (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1) (Note 2) (Note 1.


NSBC144TF3 MUN2237 MUN5237


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)