EMG2DXV5, EMG5DXV5
Dual Bias Resistor Transistors
NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor N...
EMG2DXV5, EMG5DXV5
Dual Bias Resistor
Transistors
NPN Silicon Surface Mount
Transistors with Monolithic Bias Resistor Network
This new series of digital
transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor
Transistor) contains a single
transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT−553 package which is designed for low power surface mount applications.
Features
Simplifies Circuit Design Reduces Board Space Reduces Component Count Moisture Sensitivity Level: 1 Available in 8 mm, 7 inch Tape and Reel Lead−Free Solder Plating These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Collector-Base Voltage
VCBO
50
Vdc
Collector-Emitter Voltage
VCEO
50
Vdc
Collector Current
IC 100 mAdc
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Total Device Dissipation TA = 25°C Derate above 25°C
Thermal Resistance − Junction-to-Ambient
PD RqJA
230 (Note 1) 338 (Note 2) 1.8 (Note 1) 2.7 (Note 2) 540 (Note 1) 370 (Note 2)
mW °C/W
°C/W
Thermal Resistance − Junction-to-Lead
RqJL
264 (Note 1) 287 (Note 2)
°C/W
Junction and Storage Temperatur...