UProcessor Supervisory
AME
AME8502
n General Description
The AME8502 family allows the user to customize the CPU reset function without any ext...
Description
AME
AME8502
n General Description
The AME8502 family allows the user to customize the CPU reset function without any external components. The user has a large choice of reset voltage thresholds, reset time intervals, and output driver configurations, all of which are preset at the factory. Each wafer is trimmed to the customers specicications.
There circuits monitor the power supply voltage of µP based system. When the power supply voltage drops below the voltage threshold a reset is asserted immediately (within an interval TD1). The reset remains asserted after the supply voltage rises above the voltage threshold for a time interval, TD2. The reset output may be either active high (RESET) or active low (RESETB). The reset output may be configured as push-pull. The state of the reset output is guaranteed to be correct for supply voltages greater than 0.9V.
µProcessor Supervisory
n Application
l Portable Electronics l Power Supplies l Computer Peripherals l Data Acquisition Systems l Applicatiions using CPUs l Consumer Electronics
n Typical Application
VIN
RESET / RESETB GND
VIN
Processor
RESET Input
GND
n Features
n Functional Block Diagram
l Internally Fixed Threshold 1.2V to 4.5V in 0.1V Step
l High Accuracy ±1.5% l Low Supply Current 3µA l No External Components Required
l Quick Reset within 20µs l Built-in Recovery Delay Include 0ms, 55ms,
220ms, 450ms l Low Functional Supply Voltage 0.9V l Push-Pull Output l Small SOT-23, TSOT-23A, SOT-143, SC-70-4,
SOT-25 and TSOT...
Similar Datasheet