AMC-145

AM-145 / AMC-145 High Performance Amplifier, 11 dB Gain, 10 - 1000 MHz Features  2.5 dB Typical Midband Noise Figure  +19 dBm Typical Midband Output Power  +37 dBm Typical Midband Third Order Intercept Description M/A-COM’s AM-145 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8 package. Due to the internal power dissipation the thermal rise minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-145 are ideally suited for use where a high intercept, high reliability amplifier is required. Ordering Information Part Number AM-145 PIN 3 AMC-145 SMA Package TO-8-1 Connectorized 3. Mounting kit part number AU00071 required for PCB applications. Outline Drawing: TO-8-1 * Rev. V4 RF OUT .220 (5.6) MIN .220 (5.6) MAX DC IN RF IN .150 (3.8) TYP. .300 (7.6) TYP. GND 4X Ø .018+/-.005 (0.46+/-0.13) .450 (11.4) Ø .50 (12.7+0.5) WEIGHT (APPROX) 0.10 OUNCES 2.8 GRAMS Outline Drawing: SMA Connectorized * Absolute Maximum Ratings 1 Parameter Max. Input Power Vbias Operating Temperature Storage Temperature Absolute Maximum +10 dBm +15.75 V -55°C to +85°C -65°C to +125°C 1. Operation of this device above any one of these parameters may cause permanent damage.  Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 1 M/A-COM Technology So...