SN74LS10 GATE Datasheet

SN74LS10 Datasheet, PDF, Equivalent


Part Number

SN74LS10

Description

TRIPLE 3-INPUT NAND GATE

Manufacture

ON Semiconductor

Total Page 2 Pages
Datasheet
Download SN74LS10 Datasheet


SN74LS10
SN74LS10
TRIPLE 3-INPUT NAND
GATE
VCC
14 13
12
11 10
9
8
1234567
GND
Symbol
VCC
Supply Voltage
Parameter
TA Operating Ambient Temperature Range
IOH Output Current — High
IOL Output Current — Low
http://onsemi.com
TRIPLE 3-INPUT NAND GATE
LOW POWER SCHOTTKY
14
1
J SUFFIX
CERAMIC
CASE 632-08
14
1
N SUFFIX
PLASTIC
CASE 646-06
14
1
D SUFFIX
SOIC
CASE 751A-02
ORDERING INFORMATION
SN54LSXXJ
SN74LSXXN
SN74LSXXD
Ceramic
Plastic
SOIC
Min Typ Max Unit
54 4.5 5.0 5.5
74 4.75 5.0 5.25
V
54 55 25 125 °C
74 0 25 70
54, 74
0.4
mA
54 4.0 mA
74 8.0
© Semiconductor Components Industries, LLC, 2006
June, 2006 Rev. 6
1
Publication Order Number:
SN74LS10/D

SN74LS10
SN74LS10
DC CHARACTERISTICS OVER OPERATING
TEMPERATURE RANGE (unless otherwise specified)
Symbol
Parameter
Limits
Min Typ Max
VIH Input HIGH Voltage
2.0
VIL Input LOW Voltage
VIK Input Clamp Diode Voltage
VOH Output HIGH Voltage
VOL Output LOW Voltage
54
74
0.65
54 2.5 3.5
74 2.7 3.5
54, 74
0.25
74 0.35
IIH Input HIGH Current
IIL Input LOW Current
IOS Short Circuit Current (Note 1)
20
Power Supply Current
ICC Total, Output HIGH
Total, Output LOW
Note 1: Not more than one output should be shorted at a time, nor for more than 1 second.
AC CHARACTERISTICS (TA = 25°C)
Limits
Symbol
Parameter
Min Typ
tPLH Turn-Off Delay, Input to Output
tPHL Turn-On Delay, Input to Output
9.0
10
0.7
0.8
1.5
0.4
0.5
20
0.1
0.4
100
1.2
3.3
Max
15
15
Unit
V
V
V
V
V
V
V
μA
mA
mA
mA
mA
Unit
ns
ns
Test Conditions
Guaranteed Input HIGH Voltage for
All Inputs
Guaranteed Input LOW Voltage for
All Inputs
VCC = MIN, IIN = 18 mA
VCC = MIN, IOH = MAX, VIN = VIH
or VIL per Truth Table
IOL = 4.0 mA
IOL = 8.0 mA
VCC = VCC MIN,
VIN = VIL or VIH
per Truth Table
VCC = MAX, VIN = 2.7 V
VCC = MAX, VIN = 7.0 V
VCC = MAX, VIN = 0.4 V
VCC = MAX
VCC = MAX
Test Conditions
VCC = 5.0 V
CL = 15 pF
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
http://onsemi.com
2
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
SN74LS10/D


Features SN74LS10 TRIPLE 3-INPUT NAND GATE VCC 1 4 13 12 11 10 9 8 1234567 GND Sym bol VCC Supply Voltage Parameter TA Operating Ambient Temperature Range IO H Output Current — High IOL Output Cu rrent — Low http://onsemi.com TRIPLE 3-INPUT NAND GATE LOW POWER SCHOTTKY 14 1 J SUFFIX CERAMIC CASE 632-08 14 1 N SUFFIX PLASTIC CASE 646-06 14 1 D SUFFIX SOIC CASE 751A-02 ORDERING IN FORMATION SN54LSXXJ SN74LSXXN SN74LSXX D Ceramic Plastic SOIC Min Typ Max Un it 54 4.5 5.0 5.5 74 4.75 5.0 5.25 V 54 −55 25 125 °C 74 0 25 70 54, 74 − 0.4 mA 54 4.0 mA 74 8.0 © Sem iconductor Components Industries, LLC, 2006 June, 2006 − Rev. 6 1 Publicat ion Order Number: SN74LS10/D SN74LS10 DC CHARACTERISTICS OVER OPERATING TEMP ERATURE RANGE (unless otherwise specifi ed) Symbol Parameter Limits Min Typ Max VIH Input HIGH Voltage 2.0 VIL I nput LOW Voltage VIK Input Clamp Diode Voltage VOH Output HIGH Voltage VOL Out put LOW Voltage 54 74 − 0.65 54 2.5 3.5 74 2.7 3.5 54, 74 0.25 74 0.35 .
Keywords SN74LS10, datasheet, pdf, ON Semiconductor, TRIPLE, 3-INPUT, NAND, GATE, N74LS10, 74LS10, 4LS10, SN74LS1, SN74LS, SN74L, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)