RF to IF Dual Downconverting Mixer
RF to IF Dual Downconverting Mixer
GENERAL DESCRIPTION
This document describes the specifications for the IDTF1100 Zero-...
Description
RF to IF Dual Downconverting Mixer
GENERAL DESCRIPTION
This document describes the specifications for the IDTF1100 Zero-DistortionTM RF to IF Downconverting Mixer. This device is part of a series of downconverting mixers covering all UTRA bands. See the Part# Matrix for the details of all devices in the series.
The F1100 dual channel device operates with a single 5V supply. It is optimized for operation in a Multicarrier BaseStation Receiver for RF bands from 698 to 915 MHz with High Side Injection. IF frequencies from 150 to 450 MHz are supported. Nominally, the device offers +41 dBm Output IP3 with 350 mA of ICC.
COMPETITIVE ADVANTAGE
In typical basestation receivers the mixer limits the linearity performance for the entire receive system. The F1100 with Zero-Distortion technology dramatically improves the maximum IM3 interference that the BTS can withstand at a desired Signal to Noise Ratio (SNR.)
IP3O: ⇑ 7 dB
Allows for higher RF gain improving Sensitivity
PART# MATRIX
Part# F1100 F1102 F1150 F1152 F1162
RF freq range 698 - 915 400 - 1000 1700 - 2200
1400 - 2200
2300 – 2700
UTRA bands
5,6,8,12,13,14,17 ,19,20
5,6,8,12,13,14,17 ,19,20
1,2,3,4,9,10, 33, 34,35, 36, 37,39 1,2,3,4,9,10, 211, 241, 33, 34,35,
36, 37,39
7,38,40,41
IF freq range 150 - 450 50 - 300 50 - 450
50 - 350
50 – 500
Typ. Gain
9
Injection High Side
9.0 Both
8.5 High Side
8.5 Low Side
8.8 Both
1 – with High side injection
F1100
DATASHEET
698 - 915 MHz F1100NBGI
FEATURES
Dual Path for Diversity...
Similar Datasheet