Document
P3P76Z11D, P3P76Z11DH
Low Voltage, Timing-Safe]
Peak EMI reduction IC
Functional Description P3P76Z11D/DH is a versatile low voltage peak EMI reduction IC
based on Timing−Safe technology. P3P76Z11D/DH accepts one input from an external reference, and locks on to it delivering a 1x Timing−Safe output clock. P3P76Z11D/DH has a Frequency Selection (FS) control that facilitates selecting one of the two frequency ranges within the operating frequency range. Refer frequency Selection table. The device has an SSEXTR pin to select different deviations depending upon the value of an external resistor connected at this pin to GND. P3P76Z11D/DH has a DLY_CTRL for adjusting the Input−Output clock delay, depending upon the value of the capacitor connected at this pin to GND. PD# / OE provide the Power Down option. Outputs will be tri−stated when power down is active.
P3P76Z11D is a Low drive part and P3P76Z11DH is a High drive part. Refer to DC/AC Electrical characteristic table.
P3P76Z11D/DH operates over a supply voltage range of 1.8 V ± 0.2 V, and is available in an 8 Pin WDFN (2 mm x 2 mm) Package.
General Features
• 1x , LVCMOS Timing−Safe Peak EMI Reduction • Input Clock Frequency:
15 MHz − 75 MHz
• Output Clock Frequency( Timing−Safe):
15 MHz − 75 MHz
• Analog Frequency Deviation Selection • Analog Input−Output Delay Control • Power Down option for Power Save • Low and High drive parts • Supply Voltage: 1.8 V ± 0.2 V • 8 pin WDFN(2 mm x 2 mm) package • These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Application
• P3P76Z11D/DH is targeted for use in consumer electronic
applications like mobile phones, Camera modules, MFP and DPF.
http://onsemi.com
MARKING DIAGRAMS
1
WDFN8 CASE 511AQ
1 CCMG G
CC = Specific Device Code M = Date Code G = Pb−Free Device
PIN CONFIGURATION
CLKIN 1 PD#/OE 2
FS 3 GND 4
8 VDD
P3P76Z11D/DH
7 SSEXTR 6 DLY_CTRL
5 ModOUT
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
March, 2011 − Rev. 0
1
Publication Order Number: P3P76Z11D/D
P3P76Z11D, P3P76Z11DH
DLY_CTRL VDD
SSEXTR
CLKIN
PLL
ModOUT (Timing−Safe)
PD#/OE
GND
FS
Figure 1. Block Diagram
Table 1. PIN DESCRIPTION
Pin#
Pin Name
Type
1I
CLKIN
2 I PD# / OE
3I
FS
4P
GND
5 O ModOUT
6 O DLY_CTRL
7 I SSEXTR
8P
VDD
Description External reference Clock input. Power Down. Pull LOW to enable Power Down. Outputs will be tri−stated when power down is enabled. Pull HIGH to disable power down and enable output.Has NO default state. Frequency Select (see Frequency Selection table for details). Has NO default state. Ground Buffered modulated Timing−Safe clock output External Input−Output Delay control Analog Spread Selection through external resistor to GND. Supply Voltage
Table 2. FREQUENCY SELECTION TABLE FS 0 1
Frequency (MHz) 15 − 30 30 − 75
Table 3. OPERATING CONDITIONS Symbol VDD Supply Voltage TA Operating Temperature CL Load Capacitance CIN Input Capacitance
Description
Min Max Unit 1.6 2 V 0 +70 °C
15 pF 7 pF
http://onsemi.com 2
P3P76Z11D, P3P76Z11DH
Table 4. ABSOLUTE MAXIMUM RATING
Parameter
Min Max Unit
Supply Voltage to Ground Potential
−0.3
+2.7
V
DC Input Voltage(CLKIN)
−0.3
+2.7
V
DC Input Voltage (Except CLKIN)
−0.3
VDD + 0.3
V
Storage Temperature
−65
+150
°C
Max. Soldering Temperature (10 sec)
260 °C
Junction Temperature
150 °C
Static Discharge Voltage (As per JEDEC STD22− A114−B)
2000
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Table 5. DC ELECTRICAL CHARACTERISTICS FOR VDD = 1.8 V + 0.2 V
Symbol
Parameter
Test Conditions
Min Typ Max Unit
VDD Supply Voltage VIH Input HIGH Voltage
1.6 0.65 * VDD
1.8
2
V V
VIL Input LOW Voltage
0.35 * VDD
V
IIH Input HIGH Current IIL Input LOW Current VOH Output HIGH Voltage
VOL Output LOW Voltage
ICC Static Supply Current IDD Dynamic Supply Current
VIN = VDD VIN = 0 V IOH = −8 mA (P3P76Z11D) IOH = −16 mA (P3P76Z11DH) IOL = 8 mA (P3P76Z11D) IOL = 16 mA (P3P76Z11DH) PD# pin pulled to GND Unloaded Output FS = 0, @ 15 MHz
FS = 0, @ 30 MHz
0.75 * VDD
5 mA 5 mA
V
0.25 * VDD
10 3 5
V mA
FS = 1, @ 30 MHz
4 mA
FS = 1, @ 75 MHz
10
Zo Output Impedance
P3P76Z11D P3P76Z11DH
23 W 17
http://onsemi.com 3
P3P76Z11D, P3P76Z11DH
Table 6. AC ELECTRICAL CHARACTERISTICS FOR VDD = 1.8 V + 0.2 V
Parameter
Test Conditions
Min Typ Max
Input Frequency
FS = 0
15 30
FS = 1
30 75
ModOUT
FS = 0
15 30
FS = 1
30 75
Duty Cycle (Notes 1 and 2) Rise Time (Notes 1 and 2)
Measured at VDD / 2 Measured between 20% to 80%
P3P76Z11D
45 (49−51) 55 1.3 2.1
P3P76Z11DH
1 1.7
Fall Time (Notes 1 and 2)
Measured between 80% to 20%
P3P76Z11D
1.3.