74ALVC16374

74ALVC16374 Low−Voltage 1.8/2.5/3.3 V 16−Bit D−Type Flip−Flop With 3.6 V−Tolerant Inputs and Outputs (3−State, Non−Inverting) The 74ALVC16374 is an advanced performance, non−inverting 16−bit D−type flip−flop. It is designed for very high−speed, very low−power operation in 1.8 V, 2.5 V or 3.3 V systems. The ALVC16374 is byte controlled, with each byte functioning identically, but independently. Each byte has separate Output Enable and Clock Pulse inputs. These control pins can be tied together for a full 16−bit operation. The 74ALVC16374 consists of 16 edge−triggered flip−flops with individual D−type inputs and 3.6 V−tolerant 3−state outputs. The clocks (CPn) and Output Enables (OEn) are common to all flip−flops within the respective byte. The flip−flops will store the state of individual D inputs that meet the setup and hold time requirements on the LOW−to−HIGH Clock (CP) transition. With the OE LOW, the contents of the flip−flops are available at the outputs. When the OE is HIGH, the outputs go to the high impedance state. The OE input level does not affect the operation of the flip−flops. Designed for Low Voltage Operation: VCC = 1.65−3.6 V 3.6 V Tolerant Inputs and Outputs High Speed Operation: 3.6 ns max for 3.0 to 3.6 V 4.5 ns max for 2.3 to 2.7 V 7.8 ns max for 1.65 to 1.95 V Static Drive: ±24 mA Drive at 3.0 V ±12 mA Drive at 2.3 V ±4 mA Drive at 1.65 V Supports Live Insertion and Withdrawal IOFF Specification Guarantees High Impedance When VCC = 0 V† Ne...