Document
Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● Dual rectifier construction, positive center tap ● Low forward voltage,high efficiency ● Guarding for over voltage protection ● For use in low voltage,high frequency inverters ● Free wheeling and polarity protection applications
MBRF10200CT Schottky Barrier Rectifier
CASE:TO-220F-AB
Mechanical Characteristics ● Case:Epoxy,Molded ● Weight: 1.9 grams (approximately) ● Finish:All external surfaces corrosion resistant and terminal leads are solderable ● Lead temperature for soldering purposes:260°C Max. for 10 sec ● Shipped 50 units per plastic tube
Maximum Ratings and Electronical Characteristics (TC=25°C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current at Tc=105°C total device per diode Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode
Peak repetitive reverse current per leg at tp=2.0us ,1KHz
TEST CONDITIONS
SYMBOL VRRM VRWM VDC IF(AV)
IFSM
IRRM
Voltage rate of change(rated VR) Operating junction temperature range
Storage temperature range
Isolation voltage (TO220F-AB only) from terminal heatsink t = 1 sec Maximum instantaneous forward voltage per leg
to
Maximum reverse current per leg at working peak Reverse voltage
IF=5A IF=5A
TC=25℃ TC=125℃
TJ=25℃ TJ=100°C
DV/dt
TJ TSTG VAC
VF
IR
Thermal Characteristics Ta=25℃ unless otherwise noted
Symbol
Parameter
RθJC
Thermal Resistance,Junction to Case per Leg
RθJA
Thermal Resistance,Junction to Ambient per Leg
Note:
Max 4.0
62.5
1. Screw mounting with 4-40 screw,where washer diameteris≤4.9mm(0.19〃)
2. Pulse test:300us pulse width,1% duty cycle
MBRF10200CT
200 200 200 10
5
125
0.5 10000 -55 to+150 -55 to+150
1500
0.92 0.82 500 7
Unit
°C /W °C /W
UNIT
V V V A
A
A V/us °C °C V
V uA mA
1/4
MBRF10200CT Schottky Barrier Rectifier
Rating and Characteristic Curves (Tc=25℃ Unless otherwise noted)
2/4
Package Outline (TO-220F-AB) UNIT:MM
MBRF10200CT Schottky Barrier Rectifier
Lead Frame Material : Copper Plating: Pure Tin Plating
3/4
MARKING MBRF10200CT
MBRF10200CT Schottky Barrier Rectifier
1. Part Name : MBRF10200CT 2. Logo Mark: 3. Polarity:
www.goodarksemi.com
4/4 Doc.USMBRF10200CTx1
.