Commercial Thin Film Chip Resistor
www.vishay.com
PTN
Vishay Dale Thin Film
Commercial Thin Film Chip Resistor, Surface Mount Chip
Actual Size 1505
The...
Description
www.vishay.com
PTN
Vishay Dale Thin Film
Commercial Thin Film Chip Resistor, Surface Mount Chip
Actual Size 1505
These chip resistors are available in both “top side” and “wraparound” termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic E of MIL-PRF-55342.
CONSTRUCTION
Passivation
Tantalum Nitride Resistive Film
Solder Coating
Nickel Barrier
High Purity Alumina Substrate Adhesion Layer
FEATURES
Moisture resistant
High purity alumina substrate
Non-standard values available
Available
Will pass +85 °C, 85 % relative humidity and
10 % rated power
Available
100 % visual inspected per MIL-PRF-55342
Non-inductive Very low noise and voltage coefficient (< -30 dB)
Available
Laser-trimmed tolerances to ± 0.05 %
Wraparound resistance less than 10 m
Available
Epoxy bondable termination available
Sulfur resistant (per ASTM B809-95 humid vapor test)
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminatio...
Similar Datasheet