PTN2010

www.vishay.com PTN Vishay Dale Thin Film Commercial Thin Film Chip Resistor, Surface Mount Chip Actual Size 1505 These chip resistors are available in both “top side” and “wraparound” termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic E of MIL-PRF-55342. CONSTRUCTION Passivation Tantalum Nitride Resistive Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer FEATURES Moisture resistant High purity alumina substrate Non-standard values available Available Will pass +85 °C, 85 % relative humidity and 10 % rated power Available 100 % visual inspected per MIL-PRF-55342 Non-inductive Very low noise and voltage coefficient (< -30 dB) Available Laser-trimmed tolerances to ± 0.05 % Wraparound resistance less than 10 m Available Epoxy bondable termination available Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminatio...