LV8813G

LV8811G, LV8813G Advance Information Motor Driver, 3-Phase, PWM, Full-Wave, BLDC Overview The LV8811G / LV8813G is a 3-phase BLDC motor driver which is controlled by single Hall sensor. A 180 degrees sinusoidal driving method is adopted and the IC can control motor with low vibration and the low noise. In addition, lead-angle adjustment is possible by an external pin. Lead-angle value and lead-angle slant can be adjusted independently. Thus, the device can be driven by high efficiency and low noise with various motors. The power element to drive a motor is built-in and contributes to high efficiency by low on resistance (0.5 Ω). The Hall sensor bias driver is equipped, and a Hall IC is supported as well. As a method of the rotary speed control of the motor, direct-PWM pulse input or DC-voltage input can be chosen. www.onsemi.com 20-pin TSSOP with exposed pad CASE 948AZ MARKING DIAGRAM Features 3-phase full wave (sinusoidal) drive Any practical combination of slot and pole can be handled. (e.g. 3S3P, 3S4P, 6S4P, 6S8P, 12S8P, 9S12P and so on) built-in power FETs (P-MOS/N-MOS) Speed control function by direct PWM or DC voltage input Minimum input PWM duty cycle can be configured by voltage input Soft start-up function and soft shutdown function Soft PWM duty cycle transitions Built-in current limit circuit and thermal protection circuit Regulated voltage output pin for Hall sensor bias Built-in locked rotor protection and auto recovery circuit FG signal ...