MT9P001

1/2.5-Inch 5 Mp CMOS Digital Image Sensor MT9P001 The 5 Mp CMOS image sensor features onsemi’s breakthrough low−noise CMOS imaging technology that achieves CCD image quality (based on signal−to−noise ratio and low−light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. The onsemi MT9P001 is a 1/2.5−inch CMOS active−pixel digital image sensor with an active imaging pixel array of 2592 H x 1944 V. It incorporates sophisticated camera functions on−chip such as windowing, column and row skip mode, and snapshot mode. It is programmable through a simple two−wire serial interface. Table 1. KEY PERFORMANCE PARAMETERS Parameter Value Optical Format 1/2.5−inch (4:3) Active Imager Size 5.70 mm (H) x 4.28 mm (V) 7.13 mm Diagonal Active Pixels 2592 H x 1944 V Pixel Size 2.2 x 2.2 mm Color Filter Array RGB Bayer Pattern Shutter Type Global Reset Release (GRR), Snapshot Only Electronic Rolling Shutter (ERS) Maximum Data Rate / Master Clock 96 Mp/s at 96 MHz (2.8 V I/O) 48 Mp/s at 48 MHz (1.8 V I/O) Frame Rate Full Resolution Programmable up to 15 fps VGA (640 x 480, with Binning) Programmable up to 70 fps ADC Resolution 12−bit, On−chip Responsivity 1.4 V/lux−sec (550nm) Pixel Dynamic Range 70.1 dB SNRMAX Supply Voltage I/O 38.1 dB 1.7−3.1 V Digital 1.7−1.9 V (1.8 V Nominal) Analog 2.6−3.1 V (2.8 V Nominal) Power Consumption 381 mW at 15 fps Full Resolution Operating Temperature −30C to +70C Packaging 48−pin i...