CS5210-1

CS5210−1 10 A LDO 3−Pin Adjustable Linear Regulator The CS5210−1 linear regulator provides 10 A at adjustable voltages from 1.25 V to 4.5 V. This adjustable device requires two external resistors to set the output voltage and provide the minimum load current for proper regulation. This regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages as low as 1.05 V at 10 A. The regulator is protected against overload conditions with overcurrent and thermal shutdown protection circuitry. The regulator is available in a TO−220 package. Features 1.25 V to 4.5 V VOUT at 10 A Dropout Voltage < 1.05 V @ 10 A 2.0% Trimmed Reference Fast Transient Response Thermal Shutdown Current Limit Short Circuit Protection 5.0 V VIN VOUT CS5210−1 Adj 100 μF 0.1 μF 3.3 V @ 10 A 124 Load 200 300 μF Figure 1. Applications Diagram http://onsemi.com TO−220 THREE LEAD T SUFFIX CASE 221A 12 3 PIN CONNECTIONS AND MARKING DIAGRAMS CS5210−1 AWLYWW Tab = VOUT Pin 1. Adjust 2. VOUT 3. VIN 1 A = Assembly Location WL, L = Wafer Lot YY, Y = Year WW, W = Work Week ORDERING INFORMATION Device Package Shipping CS5210−1GT3 TO−220* 50 Units/Rail *TO−220 is 3−pin, straight leaded. © Semiconductor Components Industries, LLC, 2006 July, 2006 − Rev. 7 1 P...