MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
NEW PRODUCT
AH9251
MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH9251...
Description
NEW PRODUCT
AH9251
MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH9251 is a medium sensitivity Hall-effect switch with internal pull-up resistor on the output, designed for battery operated handheld equipments to industrial applications.
A chopper stabilized architecture improves stability of magnetic switch points over the whole operating range. A sleep-awake logic controls the sleep and awake time to reduce the average operating current of the device. During the awake time, the output is changed with the magnetic flux density. During the sleep time, the output is latched in its previous state and the current consumption reduces to 4µA typical at 3V. The average current consumption is 8µA at 3V.
The output can be switched on with either north or south pole of sufficient strength. If the magnetic flux density perpendicular to the part marking surface is larger than operating point (BOP), the output will be turned on; if it is less than releasing point (BRP), the output will be turned off.
The AH9251 is available in industry standard TO92S and SC59 packages.
(Front View)
3 2 1
TO92S
(Top View) GND
3
OUTPUT GND VDD
Features
Omnipolar Operation (Switching with North or South Poles) 2.5V to 5.5V Power Supply Micropower Operation Built in Pull-up Resistor on the Output Stabilized Chopper Superior Temperature Stability Digital Output Signal -40°C to +85°C Operating Temperature ESD (HBM): 5000V Small Low Profil...
Similar Datasheet