Document
Protection Device
TVS (Transient Voltage Suppressor)
ESD113-B1 Series
Bi-directional, 3.6 V, 0.2 pF, 0201, 0402, RoHS and Halogen Free compliant
ESD113-B1-02ELS ESD113-B1-02EL
Data Sheet
Revision 1.2, 2014-05-14 Final
Power Management & Multimarket
Edition 2014-05-14 Published by Infineon Technologies AG 81726 Munich, Germany © 2014 Infineon Technologies AG All Rights Reserved.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com)
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
1 Product Overview
1.1 Features
• ESD / transient protection of high speed data lines according to: – IEC61000-4-2 (ESD): ±20 kV (air / contact) – IEC61000-4-4 (EFT): ±2.5 kV / ±50 A (5/50 ns) – IEC61000-4-5 (surge): ±3 A (8/20 μs)
• Bi-directional, working voltage up to: VRWM = ±3.6 V • Ultra low capacitance CL = 0.20 pF (typical) at f = 1 GHz • Very low clamping voltage: VCL = 14 V (typical) at ITLP = 16 A • Very low reverse current. IR < 1 nA (typical) • Very low dynamic resistance: RDYN = 0.45 Ω (typical)
• Pb-free and halogen-free package (RoHS compliant)
ESD113-B1 Series
Product Overview
1.2 Application Examples
• USB 3.0, Firewire, DVI, HDMI, S-ATA, DisplayPort, Thunderbolt • Mobile HDMI Link, MDDI, MIPI, SWP / NFC
1.3 Product Description
Pin 1 marking (lasered)
Pin 1
Pin 2
Figure 1-1 Pin Configuration and Schematic Diagram
Table 1-1 Part Information
Type
Package
ESD113-B1-02ELS
TSSLP-2-4
ESD113-B1-02EL
TSLP-2-20
Configuration 1 line, bi-directional 1 line, bi-directional
Pin 1
Pin 2
PinConf_and_SchematicDiag.vsd
Marking code 2 CC
Final Data Sheet
3 Revision 1.2, 2014-05-14
2 Maximum Ratings
ESD113-B1 Series
Maximum Ratings
Table 2-1 Maximum Rating at TA = 25 °C, unless otherwise specified1)
Parameter
Symbol
Values
ESD air discharge2) ESD contact discharge2)
VESD
±20 ±20
Peak pulse power
PPK
36
Peak pulse current3)
IPP
±3
Operating temperature
TOP
-55 to 125
Storage temperature
Tstg
-65 to 150
1) Device is electrically symmetrical
2) VESD according to IEC61000-4-2 3) Non-repetitive current pulse 8/20 µs exponential decay waveform according to IEC61000-4-5
Unit kV
W A °C °C
Attention: Stresses above the max..
Similar Datasheet