Document
UNISONIC TECHNOLOGIES CO., LTD
MGBR15V60
Preliminary
MOS GATED BARRIER RECTIFIER
DESCRIPTION
The UTC MGBR15V60 is a surface mount mos gated barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high current capability, etc.
The UTC MGBR15V60 suitable for free wheeling, high frequency inverters, polarity protection, and low voltage.
FEATURES
* Very low forward voltage drop * High current capability * High surge capability * High efficiency
SYMBOL
DIODE
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MGBR15V60L-T27-R
MGBR15V60G-T27-R
Note: Pin Assignment: A: Anode K: Common Cathode
Package TO-277
Pin Assignment 123 AKA
Packing Tape Reel
MARKING
www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-247.a
MGBR15V60
Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage (Note 1)
VRM 60 V
Working Peak Reverse Voltage Peak Repetitive Reverse Voltage
VRWM VRRM
60 60
V V
RMS Reverse Voltage Average Rectified Output Current
TC=125°C
VR(RMS) IO
42 15
V A
Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load
IFSM
200
A
Operating Junction Temperature
TJ
-65~+150
°C
Storage Temperature
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL CHARACTERISTICS
PARAMETER Junction to Ambient Junction to Case
SYMBOL θJA θJC
RATINGS 73 13
UNIT °C/W °C/W
ELECTRICAL CHARACTERISTICS (TA =25°C unless otherwise specified.)
PARAMETER
SYMBOL
TEST CONDITIONS
Reverse Breakdown Voltage (Note 1)
V(BR)R IR=0.50mA
Forward Voltage Drop
VFM
IF=15A, TC=25°C IF=15A, TC=125°C
Peak Reverse Current at Rated DC Blocking Voltage (Note 1)
IRM
VR=60V, TC=25°C VR=60V, TC=125°C
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. Thermal resistance junction to case mounted on heatsink. 3. Mounted on an FR4 PCB, single-sided copper, with 100cm2 copper pad area.
MIN TYP MAX UNIT 60 V
0.6 V 0.55 V 500 μA 50 mA
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-247.a
MGBR15V60
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in who.