DatasheetsPDF.com

Z-15GS-B Dataheets PDF



Part Number Z-15GS-B
Manufacturers Omron
Logo Omron
Description Basic Switch
Datasheet Z-15GS-B DatasheetZ-15GS-B Datasheet (PDF)

General-purpose Basic Switch Z Best-selling Basic Switch Boasting High Precision and Wide Variety • A large switching capacity of 15 A with high repeat accuracy. • A wide range of variations in contact form for your selection: basic, split-contact, maintained-contact, and adjustable contact gap types. • A series of standard models for micro loads is available. • A series of molded terminal-type models incorporating safety terminal protective cover is available. Be sure to read Safety Precautions.

  Z-15GS-B   Z-15GS-B


Document
General-purpose Basic Switch Z Best-selling Basic Switch Boasting High Precision and Wide Variety • A large switching capacity of 15 A with high repeat accuracy. • A wide range of variations in contact form for your selection: basic, split-contact, maintained-contact, and adjustable contact gap types. • A series of standard models for micro loads is available. • A series of molded terminal-type models incorporating safety terminal protective cover is available. Be sure to read Safety Precautions on page 26 and Safety Precautions for All Basic Switches. CSM_Z_DS_E_4_4 Model Number Structure Configuration Basic models General-purpose Drip-proof Split-contact models Maintained-contact models General-purpose General-purpose For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Without terminal protective cover With terminal protective cover Molded terminal Refer to page 3. Refer to page 5. Refer to page 5. Refer to page 2. Refer to page 4. Refer to page 4. Basic Models General-purpose • A variety of actuators is available for a wide range of application. • The contact mechanism of models for micro loads is a crossbar type with gold-alloy contacts, which ensures highly reliable operations for micro loads. • Contact Gap: H2: 0.20 mm (extra-high-sensitivity) H: 0.25 mm (high-sensitivity, micro voltage current load) G: 0.5 mm (standard) E: 1.8 mm (high-capacity) Drip-proof • These Switches use a rubber boot on the actuator and adhesive fill between the case and cover to increase resistance to drips. • Models with drip-proof terminal protective covers and molded terminals with resin filling are also available. Split-contact Models • This type is identical in construction to the general-purpose basic switch except that it has two pairs of simultaneous acting contacts by splitting moving contacts. • Since the moving contacts are connected to a common terminal, either parallel or series connection is possible. • Highly reliable micro load switching is ensured if the model is used as a twin-contact switch. Maintained-contact Models • The maintained-contact type has a reset button at the bottom of the switch case, in addition to the pushbutton (plunger) located on the opposite side of the reset button. Use these buttons alternately. • Since the Switch has greater pretravel than overtravel, it is suitable for use in reversible control circuits, manual reset circuits, safety limit circuits, and other circuits which are not preferable for automatic resetting. (For further details, refer to individual datasheets.) 1 Z Model Number Legend Basic Models Z-@@@@-@ (1)(2)(3)(4) (5) (1) Ratings 01 : 0.1 A (micro load) 15 : 15 A (2) Contact Gap H2 : 0.20 (extra-high-sensitivity) H : 0.25 mm (high-sensitivity, micro load) G : 0.5 mm (standard) E : 1.8 mm (high-capacity) (3) Actuator None : Pin plunger S : Slim spring plunger D : Short spring plunger K : Spring plunger (medium OP) K3 : Spring plunger (high OP) Q3 : Panel mount plunger (low OP) Q : Panel mount plunger (medium OP) Q8 : Panel mount plunger (high OP) Q22 : Panel mount roller plunger Q21 : Panel mount cross roller plunger L : Leaf spring (high OF) L2 : Roller leaf spring W21 : Short hinge lever W : Hinge lever (low OF) W3 : Hinge lever (medium OF) W32 : Hinge lever (high OF) W4 : Low-force hinge lever W44 : Long hinge lever W78 : Low-force wire hinge lever (low OF) W52 : Low-force wire hinge lever (high OF) W22 : Short hinge roller lever W2 : Hinge roller lever W25 : Hinge roller lever (large roller) W49 : Short hinge cross roller lever W54 : Hinge cross roller lever W2277 : Unidirectional short hinge roller lever (low OF) M : Reverse hinge lever M22 : Reverse short hinge roller lever M2 : Reverse hinge roller lever NJ : Flexible rod (high OF) NJS : Flexible rod (low OF) (4) Degree of Protection None : General-purpose 55 : Drip-proof (not include the terminals) A55 : Drip-proof (including the terminals) (5) Terminals None B B5V : Solder terminal : Screw terminal (with toothed washer) : Screw terminal with terminal cover (for Z-15G@A55 only) Note: For combinations of models, Ordering Information on page 3 to 6. Standard Models (Drip-proof Type/Molded Terminals) Z-@55-M@@ @M (1) (2)(3) (4) (1) Drip-proof Type (2) Lead Outlets None : VSF 19 : VCT (3) Directions of Lead Outlets (See following diagrams.) L : Left R : Right D : Descending (4) Length of Lead Outlets 1 : 1m 3 : 3m L Type D Type R Type Split-contact Models Z-10F@Y-B (1) (2)(3)(4) (5) (1) Ratings 10 : 10 A (split-contact models) (2) Contact Gap F : 1 mm (high-capacity) (3) Actuator None : Pin plunger S : Slim spring plunger D : Short spring plunger Q : Panel mount plunger Q22 : Panel mount roller plunger W : Hinge lever W22 : Short hinge roller lever W2 : Hinge roller lever M22 : Reverse short .


Z-15G-B Z-15GS-B Z-15GD-B


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)