NX3L2T384

NX3L2T384 Dual low-ohmic single-pole single-throw analog switch Rev. 5 — 8 February 2013 Product data sheet 1. General description The NX3L2T384 is a dual low-ohmic single-pole single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and an active LOW enable input (nE). When pin nE is HIGH, the analog switch is turned off. Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower input rise and fall times. A low input voltage threshold allows pin nE to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L2T384 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L2T384 allows signals with amplitude up to VCC to be transmitted from nY to nZ; or from nZ to nY. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and distortion of transmitted signals. 2. Features and benefits  Wide supply voltage range from 1.4 V to 4.3 V  Very low ON resistance (peak):  1.6  (typical) at VCC = 1.4 V  1.0  (typical) at VCC = 1.65 V  0.55  (typical) at VCC = 2.3 V  0.50  (typical) at VCC = 2.7 V  0.50  (typical) at VCC = 4.3 V  High noise immunity  ESD protection:  HBM JESD22-A114F Class 3A exceeds 7500 V  MM JESD22-A115-A exceeds 200 V  CDM AEC-Q100-011 revision B exceeds 1000 V  IEC61000-4-2 contact discharge exceeds 4000 V for switch ports  CMOS low-power con...