Document
INTEGRATED CIRCUITS DIVISION
Parameter Blocking Voltage Load Current On-Resistance (max) LED Current to operate
Rating 60 120 16 1
Units VP
mArms / mADC
mA
Features
• 1500Vrms Input/Output Isolation • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Immune to radiated EM fields • Wave Solderable • Small 8-Pin SOIC Package • Tape & Reel Version Available
Applications
• Security • Passive Infrared Detectors (PIR) • Data Signaling • Sensor Circuitry
• Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems
• Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls
Pin Configuration
1 + Control
2 – Control
3 + Control
4 – Control
8 Load
Form-B - Normally Closed 7
Load
6 Load
Form-A - Normally Open 5
Load
CPC2317N
60V Dual Single-Pole SOIC OptoMOS® Relay One Normally-Open Pole & One Normally-Closed Pole
Description
The CPC2317N is a miniature device with one independent normally-open (1-Form-A) solid state relay and one independent normally-closed (1-Form-B) solid state relay in an 8-pin SOIC package. It employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation.
The optically coupled outputs, which use IXYS Integrated Circuits Division's patented OptoMOS architecture, are controlled by a highly efficient infrared LED.
This device uses IXYS Integrated Circuits Division’s state of the art, double-molded vertical construction packaging to produce one of the world’s smallest relays. It is ideal for replacing larger, less-reliable reed and electromechanical relays.
Approvals
• UL Recognized Component: File E76270 • CSA Approval Pending • EN/IEC 60950-1 Certified Component:
TUV Certificate B 13 12 82667 003
Ordering Information
Part # CPC2317N CPC2317NTR
Description 8-Pin SOIC (50/tube) 8-Pin SOIC (2000/reel)
Switching Characteristics of Normally-Open
(Form-A) Devices
Switching Characteristics of Normally-Closed (Form-B) Devices
Form-A IF ILOAD
90% ton
10% toff
Form-B
I
F
ILOAD
10% toff
90% ton
DS-CPC2317N-R04
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
CPC2317N
Absolute Maximum Ratings @ 25ºC
Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms)
Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature
Ratings 60 5 50 1 600 1500
-40 to +85
Units VP V mA A mW Vrms °C
Storage Temperature
-40 to +125
°C
Soldering Temperature (10 Seconds)
260
°C
1 Derate linearly 5mW / ºC
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements.
Electrical Characteristics @ 25ºC
Parameter
Conditions
Symbol
Min
Typ
Output Characteristics
Load Current
Normally Open (Form-A) Continuous 1 Normally Closed (Form-B) Continuous 1 Peak On-Resistance 2 Switching Speeds
IF=1mA IF=0mA t =10ms
IL=120mA
IL -
ILPK RON -
-
-
Turn-On Turn-Off Off-State Leakage Current Output Capacitance
IF=5mA, VL=10V VL=60VP
ton toff ILEAK
-
-
Normally Open (Form-A) Normally Closed (Form-B) Input Characteristics
IF=0mA, VL=50V, f=1MHz IF=5mA, VL=50V, f=1MHz
COUT
-
5 10
Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics
IL=100mA -
IF=5mA VR=5V
IF - 0.40
IF 0.1 0.35
VF 0.9 1.2
IR -
-
Capacitance, Input to Output
VIO=0V, f=1MHz
CIO
-
1 Load current derates linearly from 120mA @ 25oC to 60mA @ 85oC, and must be derated for both poles operating simultaneously. 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 3mA is recommended.
1
Max Units
120
±350 16
mArms / mADC
mAP
3 ms
3 1 µA
pF
-
1 mA - mA 1.4 V 10 µA
- pF
2
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC2317N
Device Count (N) Device Count (N) Device Count (N)
LED Forward Voltage Drop (V) LED Current (mA) Load Current (mA)
Common Performance Data @ 25ºC (Unless Otherwise Noted)*
Typical LED Forward Voltage Drop (N=50, IF=5mA)
35
30
25
20
15
10
5
0 1.17
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
Typical IF for Switch Operation (N=50, IL=100mA)
25
20
15
10
5
0 0.30 0.35 0.40 0.45 0.50 0.55 0.60 LED Current (mA)
Typical Blocking Voltage Distribution (N=50)
(Form-A IF=0mA, Form-B IF=2mA)
35
30
25
20
15
10
5
0 80
82 84 86 88 90 Blocking Voltage (VP)
92
Typical LED Forward Voltage Drop
vs. Temperature
1.6 I =50mA
F
1.5 IF=20mA IF=10mA
1.4
1.3
1.2
1.1
1.0 -40
IF=5mA IF=2mA IF=1mA.